Voice Systems and Accessories - Small Business

Has anybody put a config from a UC520 on a UC540?  I have a config on a UC520W (4 FXO, 4 FXS) and would like to do a little troubleshooting on the system back in my lab.  All I have, however, is a UC540W, but it has the same hardware configuration (4...

Hi,Our receptionist uses a SPA962 (extension 100) and when for example user 150 has his calls forwarded to the receptionist and a new call comes in on extension 150 she would like to know what extension the caller tried to call. Is this possible to s...

We have many sites that we intend to use Cisco SPA devices at.  Many of them have 4 FXO lines that we intend to put FXS/FXO ports between.  We are trying to decide whether to use a single SPA8800 in between our PBX and the telco lines, or 4 separate ...

I know that CCA 2.1 will support Skype for SIP on a UC500 platform.Is there TAC support to run that feature on a CME/CUE platform (28xx,38xx and etc)?ThanksKallol

Is there a way to have different MoH files assigned to different FXO ports?  The company has 2 different entities running on the same UC520.  The businesses are two totally different audiences.  They have 2 FXO lines assigned to one business and 2 as...

I'm trying to install a license file onto a UC540 using CCA2.1. I keep getting this error:Error: Installing licenses from"flash:[license file].lic"% Error: License installation failed with error: File not foundThanks for your help.

Hi all,I would like to know how the usage of extension mobility profiles counts against the licensing amount of a UC520 system. For example, I have UC520 with 8 user licenses. I have configured a 8 phones as extension mobility phones. How many extens...

I have two spa2102's connected to the fxo ports of a digium aa50 pbx.  This configuration is used for an office with 18 extensions.  I have a similar setup in my own office with a trixbox server, digium fxo card and 12 extensions.  All phones are gra...

Can you please tell us how to make the ring different when a handset recevies an internal call as opposed to an external call.

Hi,I am a problems with one WIP310v2. If i start the phone the screen appear with cisco logo and two waves and nothing more. I have remove battery and reinsert therefore restart the phone but nothing change.if I waited for also 2 hours he does not ch...

How many DSP slot has the Cisco UC520-24U-8FXO-K9 ?

We purchased two UC520's and have succesfullly loaded 8.0 on both. using CCA2.1We tried going through the telephony wizard on both units. and failed at 99%We let them sit overnight and came back in the morning at 99%  If we cancel the wizard then we ...

We are having some issues with UC520.  Various IP SPA508g phones will not allow outside calls on PRI.  The phones will run fine then all the sudden no go.  You press 9 dial the number and you get dead air.  If you reboot the phone that seems to fix t...