Dear all,Unlike 76xx, I can't specific both IPv4 and IPv6 access-class on VTY for controlling the IP telnet/ ssh to ASR9K. Does ASR9K only support either IPv4 or IPv6 access-class and not both ?
Dear all,Unlike 76xx, I can't specific both IPv4 and IPv6 access-class on VTY for controlling the IP telnet/ ssh to ASR9K. Does ASR9K only support either IPv4 or IPv6 access-class and not both ?
Hi,I have the topology where ASR9K bundle interface is connected with ASR900 port-channel interface and use BFD signal but the port never come up, below is the detail. ASR9K => IOS-XR 4.3.2, linecard: A9K-MOD80-TR, A9K-MPA-4x10GEASR903 ...
Cant detect any interface using Vmware Workstation or VMplayer ver 10 ,can anyone help or support on this.Thanks
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-3/security/configuration/guide/b_syssec_cg43xasr9k/b_syssec_cg43asr9k_chapter_010.html#con_1185183My TACACS server does not support the custom parameters needed to get TACACS auth...
Hi I have an L2VPN issue with XRv, would appriciate if some one can point me to what am I missing here:* there is ping over mpls between XRv's* show l2vpn xconnect is up* show l2vpn forwarding detail location 0/0/CPU0 - show state down!? XRv1 Config...
Hi all.In our network is full mesh VPLS on ASR9010 and xconnects to me3600, like this:l2vpn bridge group BG bridge-domain BD ! ! interface TenGigE0/2/0/0.12 ! interface TenGigE0/2/0/1.12 ! interface TenGigE0/2/0/2.12 ! neighbor 10...
Does anyone have any experience with getting command authorization to work on an ASR 9000 and using TACACS.NET?If not, is there any way to just use TACACS for authentication and have all authenticated users thrown into the cisco-support level of auth...
We have a Cisco ASR9010. It contains a CGN blade in it. When running the command to look at the CGN NAT44 statistics, I get the following error:Unable to obtain requested information Error:'cgn' detected the 'warning' condition 'Core response failed'...
Hi,I want to cluster two ASR 9001, but the command "control" under "nv edge " command is not showing, it's showing only "Data" , so I can't add the chassis serials with the commands :(admin config) # nv edge control serial <rack 0 serial> rack 0(ad...
Hi folks.I'm deploying BNG at ASR9k with IOS XR 4.3.1 and have some problems with RADIUS exchange. My current config is:radius source-interface Loopback220 vrf defaultradius-server host x.y.z.198 auth-port 1812 acct-port 1813 key test!aaa attribute f...
Hi Guys I have tried all versions of IOS-XRv for Virtual Box and VMware, but in both cases the IOX-XRv crashes as soon as it boots.with the following error:Section:idt offset:0x0000006c base:fed155b4Section:pgdir offset:0x00000070 Page Directory 00...
Hello, How do I need to check that, which user has logged in at any particular time via console in IOS XR. We donot have Tacacs ThanksThanveer
Coming from IOS, looking to implement the following RADIUS commands under IOS-XR and have not found how to do so yet.Anyone know?radius-server attribute 6 on-for-login-authradius-server attribute 32 include-in-access-reqTIA,
Hi ,What are the reasons for the Generic Error count to increment singificantly . do we need to concern on these counters .************************************************************* Plim-asic ASIC Error Summary *******...
I have this access list I would like to look at the statistics. So I do aRP/0/RSP0/CPU0:iplwin75csre08#show access-lists ipv4 internet-inbound Tue Mar 11 10:22:06.703 EDTipv4 access-list internet-inbound 10 remark ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-09-2024 01:57 AM | ||
08-22-2024 12:39 PM | ||
08-11-2024 09:12 PM | ||
08-07-2024 01:36 AM | ||
08-02-2024 01:20 PM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |