XR OS and Platforms

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Take

 

Forum Posts

I have C7200 Series VXR, manufacture 1997I was press CPU RESET bottom------------- PROBLEM --------------------*** PUSH BUTTON NMI ***  PC = 0xbfc0b960, SP = 0x80005db8, RA = 0xbfc0b990CPU Registers:ZERO = 0x00000000, AT = 0xfffffffe, V0 = 0xffffffff...

madpeci72 by Level 1
  • 996 Views
  • 1 replies
  • 0 Helpful votes

Hi guys, we want to install the SMU asr9k-p-4.2.0.CSCty91147.tar on our ASR 9k. After I install add it on ASR, when I typed install activate ?, I got  two items. But when I show intall inactive, only one iteam show up. My question is which one should...

Hi All I got the problem with L3VPN on ASR9K which has topology as below;CE1<--->PE1<---->PE2<--Gi0/0/0/0-->CE2          << I used subinterface for this link                                  <--Gi0/0/0/1-->CE3          << I usde routed interface for ...

Can anybody advise if it's hardware related? RP/0/6/CPU0:Aug 16 16:45:23.168 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN_CLEAR : The fan array (Ps Fan(slot 17)) has returned to a normal level.RP/0/6/CPU0:Aug 16 16:46:16.884 : envmon_periodic[203]:...

                   Hi people I am looking for a  guide that help me to setting up IPoE sessions for the platform asr1006 working as a BRAS. Could someone recommed a document about this configuration topic?

Umpri by Level 1
  • 1085 Views
  • 0 replies
  • 0 Helpful votes

Hi,We have 2 ASR9k (v4.2.0) routers doing "light" xconnect work, no problems so far. Lately, we have noticed ntpd/gsp utilizing an abnormally high amount of CPU, is this normal behavoir on the ASR9k?RP/0/RSP0/CPU0:asr-1#show processes cpu | utility h...

bmco by Level 1
  • 2043 Views
  • 2 replies
  • 0 Helpful votes

Hi NetPro,I am planning to upgrade IOS-XR from the current (very old) 3.6.1 to 4.1.2 (seems to be stable). I would like to know:1. Can IOS-XR be upgraded directly from 3.6.1 to 4.1.2 or I will have to upgrade to intermediate image then do final upgra...

netops044 by Level 1
  • 1128 Views
  • 1 replies
  • 0 Helpful votes

Hello Experts,I am trying to recommend a SNMP object table for a costumer based on SNMP Objects that are already in use on a Nexus 7K, my goal is to recommend MIBs for IOS XR.could you recommend me a Source for comparison or compatiblity check? thank...

smehrnia by Level 7
  • 890 Views
  • 2 replies
  • 0 Helpful votes

I have cisco catalyst Model WS-C3560X-48, SW Version 15.0(1)SE2, SW Image C3560E-UNIVERSALK9-MSwitch Ports Model              SW Version            SW Image                 ------ ----- -----              ----------            ----------             ...

Hi all,I have some questions about inband management in ASR9K router IOS XR 4.2.0. - How does the router control the management traffic to avoid interfering with the service traffic passing the interface? Is it controlled by policing or queuing?- Wha...