Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Our Forum Alert III Secondary Crash Net (SCN) is inoperable. I've heard the cisco cm could be configured to set up some devices to act as a ringdown, they called it a “Switch Box.” This would allow our Base Operations guys to have a work around from ...
Hi there, Lately, we have had many customers complain about intermittent call drops for external call transfers, no music on hold, and at times no audio at a resume on the SIP trunk we have from an ITSP. The problem would sometimes surface with cert...
Dears.I Have Avaya K175 configured as SIP on Cisco Call Manager.the phone keeps disconnecting every 2- 3 minutes.I can make calls from Avaya phone to Cisco phones. but Avaya is not receiving from Cisco " gives busy tone".I checked Cisco & Avaya logs ...
Is it possible to use free pbx or astrix as a voicemail service instead of cisco unity or unity express
Hello, This is regarding a CUCM environment version 14SU3. We have around 2000 third-party phones (Teledex) to be configured on CUCM. As far as I understood from the Teledex provider, these phones use a username and password to authenticate with CUCM...
Hello everybody,I recently acquired two CP-6851-3PCC used from a call center. The first thing I did was a factory reset. Unfortunately just after the factory reset both phones says "applying configuration" and soon after I can't enter the administrat...
We use Vocera as a nurse call system and when the press a button on their keypad the button is programmed to play a certain ringtone.raw file on certain telephones. This is working fine but was implemented by people that are no longer are available...
Hello over there, Is there any way to register end user Avaya J100 to CUCM?if it is yes, how can I register it?I tried to add it as 3rd Party but not registered.CUCM is v11.5
Hi all, so we have 7821/8865 MPP firmwares phones to be used with Zoom phone in Thailand . While we tested direct connection to the Internet and via the company network to the Zoom phone SIP exchange in Singapore, we are experiencing very high packet...
Hi there,We have some 8845 registered on MS Teams. All of phones are having the same issue, the desk phone will automatically off-hook sometimes, and then showing "Timeout" on the screen after a few seconds. I was thinking the cause could be related ...
Hi, I was wondering if there is an MPP (multiplatform) version of the 8875 phone. For example 8865 comes with the code 3PW or 3PCC. If it does, does someone knows the part number?Thank you!
Cisco ip phone stuck on “configuring ip” and “unprovisioned” this was started to happen after configuring linksys E2500. Do I need to adjust DHCP settings on the router or port forwarding? Please assist.
I'm trying to get my Cisco 8851 MPP's CGI Services (such as Screenshot or CGIExecute) to work. However, I'm having problems regarding authentication with the service. The device is running firmware "sip88xx.12-0-3mpp0001-87.loads". I did the followin...
When calling in to check messages on an extension that goes straight mail, we are interrupting the phone caller live as they are in the process of leaving a message. This is a new occurrence and only happening at one school.
Hi, I have 2 Cisco 8861 phones. They are both Enterprise that I am converting to 3pcc. I plugged one in that was used and I can use it fine. I plug one in that seems brand new in the box still in the package and plug it in and the Cisco Logo appears ...
