Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello I have issues with cucm version 8.6 ; cucm service manager not running, tried utils service start Service Manager without success
I have a CME that is configured for paging. But only some of the phones "pick up" when the paging extension is dialed. In the below config, ephone 13 picks up but ephone 79 does not. Config:ephone-dn 54 number 340 paging ephone-dn 12 number 1152 cal...
Has anyone found a way to change the background image on a KEM module? Thanks in advance.
The cisco ip phone 7940\7960 support secure mode with cucm 10.5 ?
Dear Experts, Am configuring Cisco IP Phones 7942G and 3905 on CUCM 10.5.2. The message am getting on the screen of the 7942G is ''Host not found'' and 3905 is showing ''registering/provisioning''. Have tried reconfiguring the phones differently by c...
Hi,I have migrated from cisco call manager 4.1.3 to cucm 7.1.5, every change that I have made is replicated to de suscriber without problems (phones, css, partitions, locations, etc) but when I need to active or to stop any service to suscriber from ...
We have 2 cisco 2811 routers and both of them are showing clock (software and hardware) and date as Nov 1933. I did set the software clock as current time and date and then use clock update calendar command to update its hardware clock. After switchi...
Hi,I have installed informacast (version 11.0.1) with Cisco callmanager 9.0.1 and I had no problem with the paging functionality with the devices cisco 6921 . But it doesn’t work the cisco 7961 g devices, even if it should work according to the compa...
Hi. I have a CUCM with a CUBE connect with Sip service Provider. I need show in the external calls the public number (DID) for each extension and the service provider say that i show the extension and name in the header invite.Anyone know how show ...
Hi all,We have module NME-CUE "end of life software" with version unity 8.0.2.We are going to remplace for new module SM-SRE-710-K9 with CUE version 8.6.7 (CUE 8.6.7 is compatible with our CUCM ver 8.0).I have question about backup compatibility betw...
We have the task for replacing around 2,000 model 7960 series phones with shiny new 8841 models. Physically swapping the phone is easy enough, but transferring the device description, DNs, and speed dials will be tedious at best. Especially since t...
Morning All,Hoping someone out there can help resolve an issue for me.In a previous role, I was configuring a CUCM v9 the day before I left.It was a fresh install.I started creating routing patterns and noticed that if I created specific routing patt...
Hi,does anyone know how i can display the Enterprise Alternate number settings on Callmanager CLI? I'm using Version 10.5.I got some troubles with my SQL-statements.. How do i get the CTI route points with the CLI? I need to set the Number Mask on th...
Hello,First of all I don't have any experience with SIP so if this is a noob question sory.I have a SIP device (Grandstream GXW4004) with 4 FXS ports and a IP network with H323 telephony (fxs ports on routers with gateways and gatekeepers and an exte...
I am using CUCM 10.5.1.10000-7 and am using ILS to propogate dial plans between two clusters. We use quite a few CTI route points but so I generally import them into the cluster with all the appropriate settings and line association settings. I need...
