Hi Guys,I Would like know if there are any list recomendated or validate software about FTP to collect CDR in CUCM and the same question to Operation System.Thanks, Wilson
Hello,Help me please. I'm configuring CME9.5 and cant configure call transfer feature. When i perform call transfer from sip phone(69xx) to avaya, over h323 trunk, i have disconnect cause 500.Is it possible to configure this functionality(sip to h32...
DearsI have a 9971 phoneit was working fine suddenly it's not working as followswhen you connect the phone to a switchafter cisco welcome screen the display switchs offis it a hardware damage or whatThanks in advnace for you helpRegards
Hi All,Has anyone had any experience with running ISDN and SIP on the same router. I know you can do it on a 2911, just wondering if anyone has it working.
Hello,I have a cucm 8.6 and the client want record calls with asterisk.I have configured the callmanager with I have read in documentation, I mean, I configured the trunk sip, record profile , route pattern and the appication user and I have associa...
Dears,I have a customer will migrade from Nortel to Cisco.Nortel PBX has internal access codes between sites. If site A need to call site B should dail access code + Internal extenstion.We will install one cisco UC cluster v9.1 and they need to use t...
I cannot seem to get my 7941 to load the correct firmware even though I have specified the firmware with the load command and tftp-server flash:(load) command. It does not load the correct firmware, instead it loads term41.deafult.I have attached a t...
Hi guys,I found an error in my publisher server"“Out of Memory: Killed process 12823” so I can not login the server through CLI or web interface,After done hard reset, the server has came up and running fine.I believed that it is due to internal memo...
I am a newbie . I have a question reagarding phone registration Call manager shows all the phones are registered to subscriber .On the phone tftp server ip address is the publisherAll phones should be registered with the publisher ? call mana...
I have a question from a customer on the hard disk requirements for the UCCX 300 and 400 users deployments. He is questioning why in a UCS B-series environment using SAN storage is mirroring of the OS required as it is redundant and a waste of space...
Hi Folks,I've got to the point where I'm thinking of giving up on the hardware I've got because I don't think it will work, which is strange as I would have thought for a small business this would be a common configuration, unfortunately it means I'l...
I've just installed IM & Presence server, and have "Version: 9.1.1.30000-3" installed.I downloaded the latest update for CUPS (9.1.1.31900-1) from support.cisco.com and tried to install the update to the presence server. But the installer rejects the...
HIWe Have CUCM 8.x at the site . recently we observed that lots of IP phones are showing Unregistered.While investigating we found Soft key template is showing as “ None /Null”Quite surprising when we are assigning the Soft key template to phones the...
hi,not an expert here but I've manged to configure a 2811 with cme, cue and I can give a voicemail box to each of my cisco voip phones.now I've installed an analog phone on an fxs interface. the phone works but from the cue gui I can't create a voice...
