IP Telephony and Phones

I'm looking through our unity connections and I dont see a holiday greeting set.  What is the definitive way to check this?

Anyone knows it the cme and cue are able to receive fax over ip without an aditional product?Im looking a solution (reception only) for cisco cme and cue.There is a solution using tcl (on/off ramp) but it works only for FXO ports. I want implement so...

We're looking to track user activities of things like changing their the CallFwd settings whether on the phone via soft key or via the Web GUI [e.g.: someone changes CallFwd on another user's phone. Naughty user!].  We're running CUCM 8.5.  I've look...

I am having an issue with a new CME 9.0 installation. I am attempting to install on a new 2951 router with IOS version 15.2.2T1.When I attempt to accept the license agreement to activate the CME license on the router, the agreement is not displayed a...

Hi guys,I have a problem with the amount of TFTP info exchange between CM and IP Phones. We are checking and during the day, the Ip Phones sent and receive a lot of information from CM using SCCP. But using SIP the amount of traffic is minor.Did you ...

Hi,I started out helping someone with a CDR problem at https://supportforums.cisco.com/thread/2157119?tstart=30Unfortunately, I mis-read the question, and made a pigs-ear out of answering it. Can someone help the poor sole ? I suspect a call to TAC i...

I have a issue where hunting between POTS dial peers (FXS port) does not work. The Dial Peers has the same destination Pattern configured (4010).The wanted behaviour is for the call to hunt to the next dial peer when there is no answer. I know that i...

Hi guys, if anyone knows how to connect my call manager (publisher) to two core switches 6509 to be able to have redundancy so if one of my switches goes off the secnd switch will be able to keep the cucm up and running. I want to be be able to have ...

Hi,I have WS-SVC-CMM(ios 12.4.16) registered with CUCM 8.6 as MGCP gateway, I have configured mobile voice access feature on CUCM but on the CMM it get this logs after running debug voice call application*Nov 15 04:05:46.256: //-1//SCRI:/AFW_M_Script...

Hi everyone, I wanted to know how to configure G729. We have problem dialing some external number from our network and we are getting this message " We're sorry your call cannot be connected at this time. Please try your call later)." When we checked...

Hello all,I'm trying to change the ISDN screening indicator on a h323 GW. I need to do this since my provider required this action.This is the trace:Jul 13 10:10:57.403: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x02B1         Bearer Capab...

Hello ,Caller ID name is sent by our telco ( IE Facility ) and we want to block this on the IP Phone. The Gateway is controlled by mgcp.  All the checkboxes under "PRI Protocol Type Spezific Information " are unchecked . Se0/0/1:15 Q931: RX <- SETUP ...

CUCM version 6.1.5Active directly version: exchange server 2010 SP1I did the following on RTMTStep 1:  Choose System > Tools > Alert > Config Email Server.The Mail Server Configuration window displays.Step 2:   In the Mail Server field, enter the e-m...

                   Hi ,Any one help me where i will get bmp2logo.exe tool to convert .bmp image to .logo formate,And plesae tell is tht requied to convert image type if i want to change logo in  7965G phones.