Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,on CUCM we have several DN and each is part of a call pickup group, there are 5-6 call pickup group configured and they are all used. A person uses only the Jabber for Windows (so he does not have any other telephones or physical telephones) an...
Hi Everyone, So I have a GNS3 environment where I have CME-->CUBE(on CME)<--CME. My intention is to have the CUBE act as a default dial-peer for the CMEs on the left of the topology. Both CMEs have the relevant voice register/voice service/dial-peer...
I have setup a fax as a third party SIP device (Basic) and it registered and was able to receive a fax however it keeps switching to unregistered on me any time I try to send an outbound fax. It also will randomly go into unregistered sometimes even...
I have a working LDAP Filter on the IP Phone field in the AD User (&(objectCategory=person)(objectClass=user)(ipPhone=*)(!(userAccountControl:1.2.840.113556.1.4.803:=2))) However, I am having trouble creating a working LDAP filter on a custom gro...
Dear Team, I would seek your kind expert advise on a trouble which am facing on the Cisco Voice GW, ISR 4431. The scenarios is below.We have many SIP range configured on this voice gateway all are working inbound and outbound calls.Recently we have a...
Dear Team,I have a CUCM 11.5 and there is a request from a customer in order to manipulate their calling number in the outgoing calls to PSTN.I have successfully implemented this with various ways such like:1. using the "external phone number mask" f...
Call flowITSP-SIPTRUNK-CUBE-CUCM-CUC (AA)-Phones Outbound call is workingInbound call direct an extension number is working The no audio issue only happens when the call goes to the call handler. DTMF is working, the call goes to the extension number...
Hi All, We have VCS-E running version X8.X. We are facing strange issue. Below is the interface configuration LAN-1 : 10.2.16.23/26 GW: 10.2.16.1 LAN-2 : 10.2.16.73/26 GW : 10.2.16.65 When We reboot the VCS-E, LAN-2 interface's default gateway ch...
Hello, I am working on setting up SSO for CUCM 12.5 SU2. The IDP system is ADFS4.0 on Windows server 2019. We are using certificates signed by our CA. I have found documentation to integrate with ADFS2.0 and 3.0. Has anyone had success getting th...
I have two queries regarding enabling the Encrypted Configuration Feature on the CUCM.1. What would be the impact after enabling encrypted configuration feature on CUCM.2. Why we should enable this feature. Please advise.
We have configured the Call forwarding function in our office. Is there any capability to show the customer's original phone number on our agent's mobile screen? As an example: Let's assume that the customer with the number 479-555-15-55 dials the nu...
Our organization currently using CIPC. But CIPC EoL has been announced. So we are planned to migrate to the Jabber. What will be the procedure and Is there any reference guide to this migration?
Using an ATA 190 for paging, connecting to a BOGAN TAMB2, without using the timeout features on the TAMB2 unit, call will not disconnect. Any suggestions?
Hello. I'm trying to enable IP phone VPN Client on 7965G IP PHONE connected to ASA5506 SSL VPN. But the authentication Failed error keeps occurring. I have followed this guide https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configurat...
We have big issue with fraud calls coming through our CUBE and can't see to resolve it. I've blocked certain number through voice translation rules but they eventually find another number and get through. We utilize E164 dial pattern and my question...
