Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I have a CME 8.1 with IOS c2900-universalk9-mz.SPA.151-1.T1.bin. We have ip phones 7942 and 6921. The problem is the following:Corporate directory is not shown in 6921s ip phones. When I press the corporate directory key appears the error messa...
Hi,i have ATA 187 registered in its two ports with CUCM 8.0(3) and i have VG 2921 with SRST version 8.1 i configured a voice register pool for each port as follows:voice register pool 1id mac 0012.7F3B.9025number 1 2800codec g711ulawvoice register po...
I have a client sharing a call manager with another company. Does anyone know how to separate the two companies so that they have separate local directories?
I am trying to incorporate call manger v4.3(2) with Unity Express 2.2.2, but evey time I run the initial setup wizard, I receive an error of "JTAPI login failed. Unsupported version of call manager detected", how can I fix this error?
Hi All,I have a customer in Egypt moving to IPT. The local Telco can deliver one of the two modem types attached. Does anyone know what i would need to order for the voice gateway with respect to E1 connectivity to work with these type of modems. Wh...
Hi to all,is it possible to downgrade cucm 7.1.5 to 7.1.3 and if yes how i can do it?thx,
Hello,I'm having trouble solving the following problem:I have a VG224 integrated with CCM 7.1.2 using the MGCP protocol. The VG224 is a subsidiary and the CCM in the array via a MPLS. When an extension is configured on the VG224 that puts the other p...
HelloWhen I try to apply update (web access enable) on 7941 phone models in a administration bulk (callmanager 7.1) Product Specifik Configuration is missing. It is not missing if I use this method on a single 7941 phone.Issue occurs when I try to up...
I'm having an issue with RTMT 8.1 on CUCM 7.1.5 not finding syslog files when they do exist, it simply states File Does Not Exist. Any ideas?Also, when I disconnect a redundant power supply I get no alarm, is there anything that needs enabling to get...
Hi we are upgrading our call manager servers from 7.0.1 to 8.0.(3a). Ii would like to know the following things.1.Is there any settings that are not carried over to 8.0(3a) from 7.0.1 after the upgrade that I need to be aware of. For exampleServices?...
hi,we have an attendant console at CUCM 6.x that works fine.Everytime somebody calling the company the call is routing to the AC Pilot Point, and if the agents are busy the call is queued.Now the customer wants, that, if the agents are busy, the call...
Hi all,I’m running CUCM 7.1.5 version with 3825 as a gateway. Currently we are using MGCP in our PRI E1 line. I have users with 7942 phones and their request is to have second number which is DID from FXO port.I have configured another 2821 router wi...
Hi,We have a 3825 router with three PVDM2-64 and one PVDM2-48. With 16 DSP channels in NM-HD-2V, it has 256 channels in the router.Recently we found that lots of DSPs are used with small amount of active calls.The following image shows that the DSP u...
We have multiple sites connected over RF links and have a centralized voice solution. We are having delay issues when trying to host conference calls in our centralized environment. Would decentralizing our deployment help this issue? If not, does...
i get the following error everytime i try to install a new subscriber to existing cluster 7.1.2.21900-55 servers are in the cluster currently.all servers 7845-H2see attachment.subscriber is local on the same switch as publisher.i added the server to ...
