Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am aware of a product that can be deployed as a Fax Server appliance from Cisco which is based on Right Fax. I would like to know if the VOIP gateway supports Fax. Can it perform Fax Server Role where it will handle incoming and outgoing fax reques...
Dear all,Can anybody help me to resolve this problem with voice gateway. I setup my Cisco Router 2801 as Voice Gateway for branch. My cisco router use VIC2-4FXO voice port and PVDM2-32 for digital processor. With the same configuration, I ready setup...
When I have a router with IOS that suopports CME I could configure IP Telephony. Why I need the license in this case?
Hi,I am using Cisco 7965 and a 7975 phones with CUCME. On one phone I configured backlight behaviors using the following ephone-template configuration commands;service phone daysDisplayNotActive ,service phone displayOnWhenIncomingCall 1service phone...
Hi i am having an issue with dbreplication on CUCM 7.1.3, Sytem is an upgrade from version 4.X to 7.1.3 and has 1 pub 3 sub server. I install 1 Pub and 2 sub so far and having dbreplication problem i go through utill dbreplication stop and util dbrep...
Hey guys,as the subject said, we are using ip communicator through a checkpoint VPN going off to a SIP trunk in order to place calls. Internally everything is fine, but once im on the VPN and i place a call, the other person cannot hear me but i can ...
Hello All,I have a IP PHone 7942G that is working fine with CME with SIP Protocol.Now I would like to configure manually the IP Phone 7942G to register to Asterisk Server.But I can not edit SIP Configuration in the IP Phone. I'm already typed **#, an...
Hello,Today I upgraded my Call Manager from 6.1.2 to 6.1.4(a)su2 and from there began an upgrade to 6.1.5 su2. The file loads successfully, the MD5 checksum is correct and it begins the upgrade process. During the upgrade it fails and I get the erro...
Hi everyone, I got a configuration that worked fine untill it upgraded. We have 16 fxo port configured in CUCM 6.1 (gateway ios is Version 12.4(15)T10) it all working fine. But when we upgraded the number of fxo ports 16 to 24 there comes t...
Hi all I have CUCM 7I used Cisoc OS Administratrtion, Settings>NTP Servers. and I added the server which is cisco router.but if ssh the serve and use the command:utils ntp status , I can find the the server Synchronized for local not for NTP.ntpd (pi...
Guys,first time configuring PRI for voice and am having a little issue with the telco. they are asking me to turn up my D channel but have no idea of how this should be done.My basic config is as follows controller T1 0/0/0 framing esf linecode b8zs ...
Trying to do a softwareware upgrade for callmanager system version 6.0.1.3000-7 using the GUI and through the ftp server but each time it fails and "Error on this page " is displayed on the browser.When I click on the error link i get the info below...
CUCM (CallManager) 6.0(1a) (6.0.1.2000-3).Anyone have issues with some web pages in OS Administration saying "Error on Page" in the lower left corner of Internet Explorer 6?For instance? Settings -> IP -> Ethernet. Trying to change the IP address g...
Hi,In CUCME you can create an XML file and use it for Local Speed Dial. How do I acheive this in CUCM 7.1? I have a customer that wants local Speed dials common to all users in a department. Can I use the same XML files I have for CUCME, How do I get...
I have a PRI into a 2921 router and need to split into DiD to phones and DID/FAX to a TCL script. The PRI is sending 4 digits....so to get to phones...that's easy...do nothing!!!The fax numbers are in the same range so i need a way to identify them ...
