IP Telephony and Phones

In CUCM7.1 are there any canned reports for the attendant console? If not, can someone recommend a good third party application that will allow you to retrieve call statistics and other info such as number of calls coming through the atdc, how many r...

Can set a 7931 phone to clear history call log ever hour?

Hi all...Looking for some initial guidance on direction for a new deployment of CUCM8. I've been looking at the Cisco VBlock products (high level at the moment) to see what can be done at the moment. I know CUCM8 can be run in VMWare, perhaps i shoul...

Hi,I have a UCM 6.1 and a Cisco Unified Mobile Communicator installed on my Nokia phone, the Question: Is it possible to register the Cisco Unified mobile communicator with UCM 6.1 without CUMA 7.0

Dear All,I have Cisco 9971 phones which i am trying to install with CUCM 7.1(3). As per datasheet it should be supported.Initially i could not even see it in the list of devices on the CUCM .Than i installed the device patch from Cisco and list start...

Hi gents,I'm facing a strange issue, I have a Cisco 2800NM Series router (2821) that has an FXS PVDM voice card configured with default configuration in the voice ports, when i try to make an intra call between two extension inside the same router th...

Hello everyone,My scenario is one Call manager Express v7 (CUCM7) running on router 2851 with one controller E1 for outbound calls.The router have one CUE2, PVDM 48, VWIC2-1MFT-T1/E1.IOS 124-24.TPart of configuration:...network-clock-participate wic ...

hi all,I'm planing to migrate a Callmanager Cluster from 4.1(3)version to 7.1(3). The Subscriber (version 4) works fine when the Publisher is UP, Once i unplug the Publisher the Subscriber goes down (IP Phone does not get resgistred and CCMAdnin menu...

Hi experts, need your help to understand and made it work the following.I was trying to work with:- Calling Party Transformation Pattern for GW egress calls- Called Party Transformation Pattern for GW Ingress callsFirst please let me know if these ar...

hi,I have a customer that wants to eavesdrop calls between their employees and customer for training purpose (for a week). They would have 2 coaches and 5-6 phones (trainees) which should be monitored.Is there any possible way to do it, without IPCC ...

I have a Cisco VG224 registered whit a Cisco Call Manager 4.0, all port are registered in the Call Manager,  but some calls are automatically disconnected, when I call from other IP Phone.Why did this happen?Could it be a physical problem?