Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,My LAN include 1 gateway with SRST feature and 1 CUCM Business Edition. I wonder how Auto Attendant work in case the CUCM BE failed.???Thank you
Guys, sorry about this, but Im unclear on this as well. Im looking at upgrading Unity 4.0. I want to know what the furtherest version of Unity I can go with Win 2000 is and what version wont work with Win 2000?
In central site a have a CME 4.1 with Unity Express, in one remote site I have CM 4.1(3)with a few phones I want to asign voice mail to these user by means of unity express
I installed the Win OS and CRA software for IPIVR 3.1(2) and put the box on the network last night. This is replacing an existing IPIVR that keeps crashing. When I check the engine status, everything is fine except the RM-CM subsystem, which stays ...
I am now ordering the newer model IP phones, 7965, 7975, 7937. When I plug in these new phones they don't work on the c4507 or c6509, but they do work on the c3750. It seems that the new phones have a higher power rating and the older switches POE is...
Hi Can any body tell me where to find the dialed number analyser in CCM ver 6.1 . In ccm ver 4 it is a plugin , we can install it, But ccm ver 6.1 i did not find in plugin. Pls let me knwoRegardsGem
Can anyone tell me how I can control the number of calls going across a wan link. I am aware you can use locations in CCM. This scenario however is different. 1 site is ccm and the other is a PBX. They are connected via 2 routers using QSIG. I was ho...
Hi,I am having trouble getting Conference Calls to work. I call a phone and after the call is active, press the Confrn button, dial the second line and call is active but as soon as I press Confrn again to bring them all together the two phones call...
Subscription failed for a subscriber in my cluster, I then deleted the subscription according to cisco documentation "Reestablishing a Broken CallManager Cluster SQLSubscription with Cisco CallManagerDocument ID: 46100"..However, when I try to recrea...
Hi All, is this possible to dial to CUE AA from outside and then dial password in order to make a call through CME system? In this case, outside user can dial to AA company and company is getting charge instead of user. any suggestion would be very a...
I'm having difficulty get BLFSD buttons to end up where I want them when I BAT in phones. Not sure what I'm doing wrong, but it seems as if the Buttons get added to the first open button, rather than where I want them on a specific button. Somethin...
I'm setting up CUCME on a 2851 running IOS 12.4(9)T7. I set up the phone loads and uploaded the firmware files, but the two phone types I have, 7941G and 7911G aren't liking it. The 7911's loop through a Cisco and "upgrading" screen, though it does...
Having issues using Grant unity access tool to tie an AD user to a subsciber, have performed this successfully in an exchange environment. I consistently get the error subsciber id not found, as if Unity cannot see the Notes based subsciber. The Unit...
I am having issues getting a fax machine connected to an FXS port configured with H323 to successfully fax directly to another Fax machine connected to a VG224 using MGCP. If you dial externally, it connects correctly and faxes correctly. If dialing ...
What's the best way to do this upgrade? To first upgrade to CCM 4.13, and then use DMA and go to 6.12? Or, upgrade to 6.11, using DMA, and then upgrade that version to 6.12?Currently, 2 server cluster, 4.02, MCS-7815 servers, going to new servers.T...
