Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All. I have just installed a CUCM 6.0.1 System . I have configuread a 7961 Ip Phone for my receptionist. I whish that who call receptionist, hear music on hold while the phone ring for the call?I know that if I use tcl script on voice gateway I c...
Has anyone else encountered a problem in which the 7937 conference phones unregister? On the phone itself, it will drop a call and then sit there with a Configuring CM List message. In the CCM server's event log, I see errors showing Device Transie...
On my 3745 router, when I try to add more ephone-dns, I get this error*Mar 3 22:42:23.764: %DIALPEER_DB-3-ADDPEER_MEM_THRESHOLD: Addition of dial-peers limited by available memoryDIALPEER_DB MessagesThe following are dial peer configuration error me...
I am having a heck of a time getting MWI to work on a 2811 with CUE. Running CME 4.1 and voice mail works (pilot #) and I can leave msg but no MWI. Right now when I dial the 4-digit MWI on dn I get a busy. Any help would be appreciated.The ephone-dn(...
Can you install CallManager and MeetingPlace Web on the same Windows 2003 Server?
I was wondering if it is possible to have Call Manager add the area code to a call? We have a branch office that has it own local gateway. When someone places a call from the branch they only have to dial 7 digits for the local call. If possible I ...
After registering with CCM 4.1, my IP phones keep restarting. It says opening connection to "CCM IP"Not sure why this happens. Its using Skinny Protocol.
Is it possible to equal both versions (active and inactive) of CCM on installed server (CCM 5.X or CCM 6.X) by just using copy command?
Morning all, I have two hunt pilot setup with about 5 members in each. If calls on these hunt group are not answered, the caller should go to voicemail. The voicemail should to to a same member in the hunt group for both hunt groups.Example: I am a m...
How can the Music on Hold volume be set in 5.1/6.0?Thanks!
I have a scenario where in CCM 2 regions are configured. Region A has defined G.711 as the codec to be used when a call is made to region B over WAN. Problem is, Region B has defined G.729 as the codec while calling region A. What will be the result ...
I have a scenario where in CCM 2 regions are configured. Region A has defined G.711 as the codec to be used when a call is made to region B over WAN. Problem is, Region B has defined G.729 as the codec while calling region A. What will be the result ...
Hi,Is it possible to extend the VLAN across the WAN?Any advice will be highly appreciated.Regards,
Hello!I have cucm 6.1 and linksys pap2-na with two FXS ports (http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c%3DL_Product_C2%26cid%3D1117044308483%26site%3DUS&pagename=Linksys%2FCommon%2FVisitorWrapper).Each of this fx...
Hi,I have a setup with two offices connected through voip FXO Branch 1 and FXS branch 2.When a user Br1 calls user 1 in Br2 this works, the problem is that user 1 in Br2 is not able to transfer the call to another FXS port in the same router!!!any he...
