Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,my NM-HDV2 module has E1 service, it's MGCP gateways controlled by CM 4.0. Debug idsn q931 shows that external incoming calls have called number of 924003xx, and the significant digit in CM is set to 4, and I have translation pattern to transl...
I have CCM 4.1.3, isdn gateways, and an Octel SMDI integration via a VG248.If a caller dials DDI to an extn and the extn dos not answer the call is passed to the voicemail.If the call is a local or national call the CLI is up 11 digits, in this insta...
Hello,Has anybody already implemented an ICT between a cluster of CCM Version 3.3 and another cluster of CCM Version 6.0 ?Is there any restriction or is that a "simple" ICT ?We would like to configure CAC also ? Has anybody done that using Location a...
Hi,I have 2 H323 gateways in a Route Group. Each gateway has an ISDN connection to a remote office. When the ISDN connection goes down in the primary gateway the callmanager(4.1.3) won't send the call to the secondary gateway (because the gateway is ...
Hi I'm starting to see calls come in from 000-000-0000 on our CCM 4.0(2a) system. In addition to that we get spam calls. The 000 number doesn't have anyone on the line when answered. Is anyone else having this type of issue?
Hi, Lots of one way speech issue btw two when call hold/retrieve involved. Trace shows CCM sends RTP stream to the port not negotiated btw two in the second leg of call. Any idea? CCM version 5.1.2 Active Version: 5.1.2.3000-2
Where can I config some CP-7906(installed in public area) not allow to access corporate directory ? CCM version is 5.1(2b) ThanksDennis Kowk
Hi all,We just upgraded to CM 6.0 and having an issue with the corporate directory. If you use it, place and then terminate the call, the directory is still active. You have to hit the 3rd soft key 3 times to get back to the idle screen.The owner o...
Is Advanced Enterprise required to configure a 2811 to be a H323 GW?
Hi friends, A client have a PSTN code (*XX*XXXX# to lock and #XX*XXXX# to unlock international calls), my question is how can I configure a dial-peer that accept this code before dialing the number.Thanks for your helpBest regards
Here is the error message "7ffdffcf user was unable to be validated #49". I created speeddials using Call Manager User page. On phone, I selected SERVICES tab and selected the fastdials but when i try i get the above displayed message. Kindly respond...
Using CUCM 6.0 BEI am having a problem with users. If I manually create a user I see that the password field is already filled in with 5 stars. I over type it and type the same thing in the confirmation field. If I then save the user it saves OK. If ...
Hi, recently i have tried to personnalize my own IVR Welcome's prompt but infortunatly i got an error with my IVR. i have recorded my file in the welcome greeting en_welcome_prompt.auHow can i solve this problem and is there any link which can help ...
We experienced some severe power issues that made the UPS to trip and both callmanagers to reboot. The callmanager service can't start now and administration and serviceability webpage can't load. You login then a blank page displays. We didn't have ...
I am having problem with CDR,When i am clicking on CDR error option and show report it is showing data is available up to a particular date with an error ID 30025 , and error is coming with code number 10021 description "There is no matching data" ...
