Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Please I need advice on how best to carry out upgrde from 3.3(4) to 4.1(3). using a different hardwareIs there any docs that can help me?My worries are using bars on 3.3(4) and the BARs data's compartibility on 4.1(3)How best should I go about this?
I would like to add a "9" to all missed or received calls under the directories button on the phone. I need to maintain dialing a "9" to get an outside line for normal calls. We are running CCM 5.X. Thanks!
We're using CCM 4.1(3)sr5b, IPCC Express Premium 4.0(5)_Build042 & CAD/CSD 6.1(5). CAD is installed on two MS Terminal Servers serving 70 (will be closer to 200) Neoware E90 thin clients running Windows CE. All is fine except agents disappear and ...
I am receiving a massive amount of errors in my tsp log files:CiscoTSP001.tsp|<--CSelsiusTSPCallList::IsValidCallHandle() |<LVL::Entry_exit><MASK::0001>Can anyone tell me what this error means?
I want use the PSTN at remote site, can I use an aditional gateway (f.ex. and 2821) with an uc500 ?.Thanks
I need to know how can I get 24 FXO ports in a ISR router and what model.Also I need another ISR router with 8 FXO and 10 FXS ports which model and configuration (EVM,NM,etc) is the most effective?. Be aware that i need at least other 2 free slots fo...
Is it possible to have the best of both worlds? Can I configure 12 ports as MGCP for Fax machines and the other 12 ports as SCCP for the Hookflash / polycom phones - MGCP only allows 1 Maximum Call per line.
We are having some problems with IP Phones resetting themselves. IP Configuring pops up or CM Down. Nothings changed on the config recently.Could be a separate problem but one of the nics on the server stops responding randomly, I have to disable a...
I have a client using CME with a longest idle hunt group. They are complaining that customers get ring tone but no phones ring. This is intermittent and the ephone-hunt statistics would indicate this with a 50% abandon rate,or the phone is being ig...
We are running 4.0 CME with a PRI. Telco is sending us the callerID name and number. The number displays properly, but does not display the name. IE.Calling Party Number i = 0x2183, '2704427361' Operation = CallingName Name presentation allowedNam...
Hi,Would you please help me with decoding the TCP options field in a TCP SYN packet? How it is used before establishing a H323 session? Is it used in a different way than a standard (not VOIP) TCP SYN request?Regards,Mladen
we are having total 4 nos.of server (two MCS server 7815(2No.) and 7835(2No.)) now i want to support 3000 ip phones using this combination of (7835and7815) is this is possible or not if it's possible then how?
i have two different MCS server 7815 and 7835 and we have support 3000 ip phone so how Clustring we do
i have two different MCS server 7815 and 7835 and we have support 3000 ip phone so how Clustring we do?
Hi,We are using NM-HDV module for hardware conferencing.Here is the present configuration in Gateway: sccp local GigabitEthernet0/0sccpsccp ccm a.b.c.d priority 1sccp switchback timeout guard 180Can we configure redundunt CCM in case of failure of r...
