IP Telephony and Phones

Hi , I have SRST gateway with 2 PRI .Each of the PRI connected to different provider.SRST configured with SIP protocol ,Each of the PRI has a different DID. voice register global  defualt mode no allow-hash-in-dn max-dn 600 max-pool 500 dialplan-patt...

Hi, is it possible to run on an old 7925 wifi phones a secure url? like extension mob for example? i installed the capf cert but nothing happens when i press the url.... this is all running fine on a 8821 phone.. thanks

I have a Cisco CP-7841 desk phone. I have set the backlight timer (Settings -> User Preferences -> Screen Preferences -> Backlight timer) to 10 s. The change holds for the remainder of the day, but when I return the office the next day, the setting h...

Hi all, I got the following error every 5 minutes from cisco TMS: 30/06/2019 11:34 - Log truncated29/06/2019 23:49 - Event executed by PWMETMSPAP0129/06/2019 23:49 - Phonebook source All Systems synchronizing29/06/2019 23:49 - Provisioning Extension ...

Hi all,we have a hotel customer are looking for the PABX upgrade, and we proposed to use Cisco BE7K solution.may I know there has any document/guide about CUCM integrate with Infor PMS? Does Cisco native support that or required 3 party solution? Tha...

Hi, I have configured Cisco 6941 working with SIP Asterisk. Everything is working fine for me but only conference is not connecting, whenever i click on conference button it put existing call on hold and allow me to dial to another number, after join...

Hi EveryoneI had a strange issue that has been happening to users and today it happened to me as well. I had a call today at 8:30am and the call  went on until 9:15 and then it just dropped. So I looked back in my call history and the call isn't ther...

Hello, Could someone explain me how to add new IP handset to CME 8.6? - I just unbox new phone (never used), remove old handset and plug to existing LAN port , handset has boot up and show "phone not registered" - So I try to see any new MAC address ...

Hello all, I am running cucm vs 12.0 with multiple servers in the cluster... We are running into an issue with one of our sites using the 7965 phones, each phone has 2 lines configured on it. When the phones are registered to one server, the phones d...

CUCM 10.5.1From my testing, the only way I can get a Universal Device Template (UDT) to properly assign buttons to a phone is to use an edited version of the factory default 'Universal Device Template Button Layout'.  Basically, I copy the default Un...

I am not sure if I am just looking at this the wrong way and not searching for the correct information to get the answer I need. I have been messing with this for about a year now and can not seem to find the answer. I have 4 DIDs with my SIP provide...