We have got Unity Connection and we have configured the caller input such that if the users get to any voicemail they can dial 0 to get to the operator (reception) and it used to work and now it is not working. When dialing zero from the voicemail us...
Forum Posts
I understand in cisco phones, call history data of missed/placed/received call information is stored against the device. In extension mobility scenario this information is lost when a user logs out from the phone. Is it possible to retain this inform...
Hi, My org has about 40 Konica Minolta MFPs with fax boards. These attach to traditional analog lines with monthly recurring costs of about 2,000 USD. I would like to eliminate the analog lines and attach to a VG224. I used to support multiple VGs ...
We are currently using a Cisco 8831 in some large conference rooms and would like to have a phone that can connect to an external vendor audio system to use the room microphones and speakers.Any suggestions?
Hi , Good Day. we have an CTI application built using CISCO JTAPI API and working fine when we monitor the extension which is not part of the recording list. The extension which is part of the recording where the CTI is enabled for this extension wit...
Resolved! CME Software and licensing ordering
Hi Experts, I have one query about CME and its licensing. - I ordered CME as attached. - I ordered cisco 7821 Qty (12) and 7861 (Qty 1) - I also ordered SW-CCME-UL Basic (Qty 12) and SW-CCME-UL-ENH (Qty 1) - The router reached to me and i figured ou...
Resolved! IP phones default offer type
Hi guys, I'm trying to go a little bit deeper with Sip and I have a doubt on early offer and delay offer. My question is this: what is the default offer type (early or delayed) for a phone registered on Cucm?I know Cucm sends DO by default on Sip Tru...
I am trying to use CP-7821 with SIP-78xx.12-5-1SR2-2 firmware and freePBX. I got status messages error verifying Config info.
Hi,can we create multiple route pattern for the same function?Scenario, and route pattern which has a transformation mask (the purpose is to mask caller id , for example if the DN 6700 dial 9.00! the called party should see 00+countrycode+ 23456700nu...
Hi, a dn has an external mask 23456788 . what if it dials an international number , will it show countrycode+ external mask ? Thanks
Resolved! Default Dial peer
Is there a default dial peer?I mean# dial-peer 1 voice VOIP Or #dial-peer 1 voice POTS Is there a default of either VOIP or POTS or something else or no default?
Good day community.I need a little help, as I'm not so familiar with CUCM and ip telephony.I have such kind of task: call coming to our company city number, should be forwarded to 2 mobile numbers.So, I tried to make it like this:Created a rule on ro...
I have 3 generic SIP phone devices (actually 3 x SPA303 Cisco Small Business phones) registered to CUCM 11. They use a 3rd party SIP device types as they are not recognised as anything within the Cisco phone portfolio. I am trying to get a single DN...
Heya guys... We've got some Cisco 9971s that I've been trying to configure to work with our SIP Server... I've got them making/receiving calls fine, which is great, but I'm seeing a weird problem that LOOKS like it is on the phone side. Specifically...
I've copied this post here as wrong forum chosen... The goal is to register 7975 (sip firmware) to multiple ip pbx (not Cisco one) . I'm able to register a single line using <proxy>USECALLMANAGER</proxy> and declaring the pbx ip settings in <call...
