Network Management

A Customer has DFM running monitoring their infrastructure that includes VG200's and other PSTN T1/PRI interfaces. Problem is that it is reporting false alarms for the subinterfaces on the T1's because they are not in use at the time it is checked. ...

Hi,Maybe somebody can help me out. My company is upgrading our current T1 line to a bonded 2xT1. Currently we're using a 2610 w/ the T1 CSU/DSU WIC as our gateway router. We're being told that it will work with our new lines, but that because it's...

I need to find out how many concurrent NAT sessions a Cisco7400 can afford? I need the max number. Where can i get this information?

Hello Es that you can me write the stages principal for the configuration of router Cisco 1701 ADSL because I do not can has to make it function correctly thank you

Dear AllI have Cisco 3745 router with NM-8A/S module.This module have v.35 interface. I have a pc connected to the serial port with the help of modem through PSTN network.I require following configuration in my router:1. Dialin PPP.2. User Authentica...

Can somebody help configure a router to boot IOS image-file and config file from a TFTP server. Tks.

I want to to use something like "snmpwalk" to write script.The script purpose is to login several switch (2950/2950G) and identify between them. Any example or cisco link or materail can teach me ?Thanks for your help!

I've been writing some scripts that are supposed to allow me to change the VLANs statically assigned to a port using Net SNMP 5.1.1's version of snmpset on the vmVlan object that is part of the CISCO-VLAN-MEMBERSHIP-MIB MIB.The problem is that I can'...

Hi All!Having problems with Campus Manager 3.X Topology Views when trying to view different VTP views under "Managed Domains" and also "Networks Views". On the tabular Topology tree view (on the left) everything works okay, but when choosing to view ...

Does anyone know if I can run VMS on my existing CW2K server? I am running the latest and greatest (LMS 2.2) with all updates ( IDUs and patches ). Or, do I need a separate server? If I need a separate server, would my existing setup be in sync with ...

Hello, everybody!How can I delete assignment interface/policy in QPM?What I have done:1. I created a policy2. The policy was assigned to an interfaceNow I want to remove the assignment.3. I deleted the interface from «Policy Groups->Assigned Network ...

I have reinstalled my DFM 1.1 and cannot get any mesages in my Monitoring tool. In the Administration tool, i cann see all the devices I want it to poll. This use to work before.On going to the Monitoring console, it is blank. What else do I need to ...

Hi all.I've installed a CW2K-System and the discovery was successful. But there ist one thing, that's not so fine.The locations of the customer are connected via MPLS.Between the routers is CDP disabled. Now, there is no link between the locations in...

We have Cisco Works RME 3.5 on Solaris and the problem is as follow:We have a Pix Firewall which had been working fine under Cisco Works. We changed the IP address of the Firewall and need to update it on Cisco Works.I deleted the device from CW and...

Hi, I want to know about an aplication that show me the complete switching topology. I have Cisco Net Assistant but this software don´t give me the complete information that I need. I have a catalyst 6509 and 30 Switches and hubs more or less.