Hi everyone,
I'm trying to perform snmp get operations on an ASR920, more precisely on the VRRP. But I've found out that while in other routers (ASR 1001-X, ISR 1100, etc...) the oid 1.3.6.1.2.1.68 works well (VRRP-MIB ), on the ASR 920 it doesnt'....
Hello everyone,
I use Cisco CLI Analyzer to analyze the show tech-support from Router, Switch, WLC. The tool can do its job.
I got the issue when I try to analyze show tech-support from Cisco ISE but the tool cannot determine the output I provided....
I'm considering upgrading our networks with a dedicated firewall solution and have learned a lot about the features of the ASA 5510. However, it appears (and correct me if I'm wrong) that it functions like a router in that the interfaces on each side...
I am not a networking guy.
We are in the process of changing MTU size to jumbo frames in hoping to speed up backups, because we thought backup usually use large amount of size of I/O's. However, we don't see obvious improvements.
I know MTU siz...
My issue, I think, is I cannot see interface Fo1/0/1 in any netflow server (Managengine Netflow, Extrahop Netflow). I can only see a Null interface only on interface fo1/0/1, I can add other interfaces and they will show up in the Netflow server choi...
Hello guys,
We have a problem. We download new IOS for asr1002-x in bootflash asr1002x-universalk9.16.03.08.SPA.bin
We confirm that the Checksum and Hash is ok but when I reboot the router. it load the old IOS.
We try with this Config but no result...
I have setup a mini ISP in Hyderabad, of 1000 users. I m using Cisco 3560e 48TD switch as my core network switch and cico 3750 as trunk to other media converters end to other areas..I want to know is that switch works fine for me?? I have approx 800m...
Hello everyone,We have CPI version 3.1 installed on VM and the OS is RHEL. My question is, is there any way to create a user account in CPI through OS command line? I know it can be done via GUI but I want to know if it possible to do it via command ...
Hello,
I have asked a few questions during the past few months and there are still many issues with it.
I have always tried to configure the device via its ASDM software but there are just too many settings which don't make sense to me so I thought i...
Folks, Good evening. My colleague and I have been trying to resolve this issue for the last few days and the solution is alluding us. Here is the setup: We have a Cisco ASA 5525 that is supplying Remote Access VPN and is an endpoint for a site to...
Hey Folks, I've been trying to get traffic passing between these two asa's for a while. I have Site A and Site B tunnel up, but traffic is not flowing completely. I can ping from Site B to Site A but when I try to Ping from Site A to Site B, I get...
I have a Prime device report run every 12 hours, and I'm checking the uptime of devices.
I have Nexus 7000 (w/Sup2) reporting its uptime is 496 days 4 hrs 22 mins 53 secs, but when I login and check, the uptime is: Kernel uptime is 1937 day(s), 21 ho...
