Other Collaboration Subjects

I have installed Jabber Version 11.0.1 and version 10.5.2 on the Call Manager and Presence, and the option Click 2 Call is not working anymore after upgrade it. Before was working the option Click 2 Call with jabber Version 9.2.2.For this reason I ne...

Hi Guys, I'm triying to make a call pick up group and I'm having that error, I'm using a 7940 and 7960 phones, and using a 500 license, This is just a lab because I'm studing for the ccna voice certification. I uploaded a picture

We've put together a Use Case Tool for you to see how you can increase productivity through collaboration. Use the tool to enhance your company’s revenue opportunities, shorten sales cycles and boost your competitive advantage. Learn about collaborat...

Hi,All IP phones are registered with Subscriber but when i checking the extension details in CUCM. Device > Phone >  In the Status and IP Address section is showing UNKNOWN whereas in IP phone IP address and Actice and Stadby Unified CM are showing. ...

Not sure if the software version within the Systems Information Overview is the same as the Firmware version... Please advise! Thanks!

Hi All,Can anyone assist in helping to configure specific extensions at a branch to make calls over WAN(T1 lines) while the other extensions use the local FXO lines for external calls. The extensions would require a code to dial out whether over the ...

After we had upgrade our VCS-Control from 7.2.1 to 8.6, we had Problems with an H323 Neighbour Gatekeeper, which is terminated on the VCS-C, to recieve Video on our TC Endpoints in SIP connection.Signalling works fine. Call is established. no Video a...

Hi All,Is there a way to change which caller id mobile users would see when a specific extension makes pstn calls? Regards,    

My company has the plan to use the switch cisco catalyst 3850 into a core switch, whether it can ?, if we just use 5 server in server farm. Thank you 

Hi All,I am working on CUCM 9X which is installed as Vm on my server.I had all the licences on my CUCM, but i had to change the IP Address of the CUCM which in turn changed the MAC-Address of my virtual machine.Now i don't have licences. Kindly help ...

We are currently running CUCM 8.6 and have IPMA setup and running in a test lab. We are ready to start rolling it out to production but ... We are also preparing for a major upgrade to CUCM 11 in the next few months and I'm looking for information ab...

Is it possible to have the phone ring through the headset port only when the phone is idle? This ability was requested for a high density callcenter where phone rings are distracting and where agents use a dual earpiece headset.