Other Collaboration Subjects

I need to control who is able to connect to ACNS (based on ip), preferably per stream or program.1) The only thing i found is to put an ACL on the interface do deny some IP addresses.a) Is there another method ?b) Can you 'deploy' the ACL method via ...

Hi,Have CUCM 6.x. Need the following functionality.There is hunt list for the sales dept consisting of 3 (three) person.There are situations when all of them are out-of-office.User forwarding settings are ignored by design for calls coming from hunt...

Dear All, I am new to Cisco UC-500 and never have configured the device previously. I have a situation where I am stuck with a smart building IT technician who is providing us with 1 MB internet link and ISDN service through a 4-core fiber optic cabl...

When I set up PollyCom IP 7936 in Communications manager I always get the message Example Administrator Account Unavaible when trying to reach the extension from our main number. I have checked all the calling search spaces, but is a user account ne...

I have a scenario of having an infrastructure of HP Procurve switches. I have 802.3af PoE to the access layer. The switches support QoS, VLAN, LLDP (not CDP), etc... I am interested in Cisco Call Manager to replace current Avaya based PBX's. Can this...

Hi,I need help.Im trying to configure a sip trunk on my cme 3825, but i cant get works.i made a call and the other side ring but thats all. just noise in both sides.i debug the ccsip messages and i saw that i sent invite messages, but never recivedac...

Hi Guys,We have just started getting some 7911's in amongst our 7912's, and I see the 7911's have a background image, in my case, its the Cisco logo and it takes up half the screen and cuts off the line text label. Is there a way to change this so th...

this was just adding phone on a cm7-adding a 7912 was ok on the first screen-on the line config, if the following is configured dn - xxyy partition - internal css - NONEthen it will proceed fine.-if on the same line config with the follwing config...

We are connected to MS OCS via a CUPS.Is it possible to add the '+' prefix to a call that goes across the SIP trunk to OCS with CUPS or CUCM?

Hi,Have NM-1CE1 which is working in 37xx router.ts physical termination is DB-15 Female (look the attachment).Telco gives copper with RJ-45 termination in turn.How can I phisically interconnect these interfaces ?Do I need to solder something or just...

Is there a way to see when phones went into SRST on the Router?

I have local user in the Cisco Unified Call Manager version 6 (End User), these users are associate whit its phones. But the login into the URL : https://ipcallmanager:8443/ccmuser/showHome.do is not succesfull ...what can I do ?