Hello!If want to upgrade the firmware on more than 500s 7912 phone, do i need to this in a maintenance period or i can do this on business hours without affecting the network?
We have a customer who experiences extremely slow response with Unity after any one of their Call Managers (set in cluster) bounce, hiccup or have a brief interruption (what ever term you would like to use). For corrective action the client has to r...
I'm seting up Unity 4.2.1 in VM mode.I'd like to understand what role exhange plays in this mode.Where are the messages stored and why is exchange needed?I couldn't find a document talking about htisThanks
My customer has a 1711 router and he'd like to use CME or SRST on it. It's going to be upgraded to 12.4(7), which supports CME 3.0, SRST 3.0 and SIP-SRST.I would like to know, what is the limit of SCCP and SIP IP phones registrations for this router ...
We have CME 3.0 with 5 remotes using 871 routers establishing VPNs with an ASA 5510. The remotes have 7960 phones. We do paging to all 7960 phones in our office through the phone loudspeakers. Is it possible to do 2-way paging across the VPNs to a...
From 7912-A dial the Hunt Pilot which contans member 7912-B, then on 7912-Cpress Pickup you get a on-hook/offhook. If I dial the directory number of 7912-B, then on 7912-C press pickup it works fine.Is there a by-design limitation of Call Pickup wit...
Is there a white paper or a "Best Practice" on testing the BARS restore for CallManager 4.1(3) SR2, using BARS 4.0(7). Now I've looked at the BARS Admin Guide documentation for V4.0(2) and the release guide for 4.0(7) and neither of them say anythin...
Running CM 4.1(3)sr1. Tried this in 2 different setups. A call is active on button 1 of the phone, another on button 2. I need to be able bring these 2 calls into a conference. Conference and select/join do not seem to work as the do with 2 calls on ...
Hi all,When a gateway goes to srst by a lan fail, What's happend with the calls log?.Exists a buffer for keep the data before send it to callmanager or de data losts....Thanks in advance.
Hi All;I load clid_authen_collect IVR in CME. when I dialed number the prompt ask me to enter account number and pin. I defined account number and pin by: "username 3000 password 1234" , but when i dialed 3000 and 1234 as account number and pin, it s...
Rookie quesiton: What is the best practice and where do I make the changes for the following senerio: Adding a Long distance t-1 Pri(diva) to complement our local T-1 pri. Need to route LD Outbound calls over the new DIVA Gateway and would like to s...
Its first time i Deploy CDP, can anyone tell me whats wrong? and why i am getting this error and i am not able to see any call records... i would be thankfull.Error Code : 10011 Error Description : System Error. Contact System Administrator.
Is there a .msi installation available for the TAPI drivers? Or does anyone know how to script the installation for a large roll-out of the TAPI driver?
