Other Collaboration Subjects

Hi All,Anyone know how difficult it would be to change the IP addressing on an ICS 7750? I have a customer that wants to move it to another VLAN.I'm not too concerned about the Callmanager and unity servers. I'm much more concerned about system manag...

well I am trying a DIRT backup on a Unity 3.5.1 server. Here is the log I am getting. I think it has to do with permisions on the mailbox's but I am not sure. I have followed the instructions from the DIRT program but I am still not able to look at o...

Cisco Call Manager 4.1(3)+ Sr1Cisco 3845 - E1 PRI IOS-12.3(11)T7If a new route pattern is added or modified then the gateway re-registers itslef or probably resets Any idea why this happens.Thanks in advance Chinmay

Hi,I want to restrict some of my IP Phones from making PSTN calls. They should be able to talk only with LAN connected IP Phones. Can anyone tell me what is the configuration for the same ?Thanks and Regards,R. Rajaraman

I have an intercluster Trunk between 2 CCM 4.0(2) clusters. If I call from the UK to the US the names and dn's of callers are displayed. When I call the other way US to UK just the DN's are displayed on the screen of the phone which is ringing. I hav...

Hi,Does Cisco 1750 support 2 VIC cards such as VIC2FXO and VIC2FXS?What is the difference between Cisco 1750-2V and Cisco 1750-4V? Does it mean that the Cisco 1750-2V supports only 1 VIC card with 2 interface and the Cisco 1750-4V supports 2 VIC card...

As suggested inhttp://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5207/products_administration_guide_chapter09186a0080392682.html#wp1349195I need to configure transfer patterns to allow Cisco IP phones to transfer telephone calls from outside ...

I have installed the AD plugin and I can see the AD users however I cannot make changes from Callmanager such as associating a user to devices or enabling CTI. I get an error indicating that access is denied.

Hello, My CCM won't configure my MGCP gateway. I mean, I can't modify the gateway configuration while using the CCM GUI. After I make the changes in the GUI and restart the gateway, the changes to not take place. Infact, I don't even think the gateay...

HiTesting the IBM Raid so broke mirror, configured some stuff and then re-mirrorCould not remirror. Couldn't find the doc on CCO on how to remirror IBM. However, there is docs on remirror HP that doesn't help me :)TIA

Hello,Is it possible to set a soft key or a hard key(the ones to the right of the screen) on the phones to call a custom service when pressed? If yes, is it possible to do it on a extension mobility profile?Thank you.Cheers,Victor

I see Cisco doesn't support MWI with DMS-100 equipment (only QSIG or T-CCS), anyone know why? Is DMS-100 proprietary to Nortel or a open standard?

http://www.cisco.com/univercd/cc/td/doc/product/voice/srst/srst33/srs33spc.htmexplains the limits for SRST 3.3:max-ephonesmax-dnWhat counts to the max-dn limit?If a phone has two lines, does this count 2 DNs automatically?Does an additional dial-peer...

Hi I have a Cisco 1760 router with VWIC 1MFT-E1 Card and I need to connect to PBX Alcatel 4300 . So the PBX has a digital link with ISDN Qsig to provide conexion with the router .My question is if the E1 Card on the router 1760 (VWIC 1MFT-E1) support...

Hello all,could someone help me and explainme what Error updating locale stands forwhen IP Communicator register to CCME 3.3.?Another thing for explanation is how weshould implement sending and receiving of faxs when we migrate absolutely to IPteleph...