Switching

Hi there is 6500 Core switch and 2960 Access  Switch the connection is between through Fiber For IPTV Systems we are Facing Issues. Many days Back there is issue in layer 1 connectivity but after More than 10 days there is Facing Channels distortion ...

Hello,   I have C3750E stack switch, When the end user try to transfer large volume of data the port goes to error-disable state!! the MAC address that appear in logs seems fake MAC"54ee.0000.0000 ". can  anybody help me why this is happen?   Interfa...

Hi Sir,I have the following port channel config on a Cisco 7609:!interface Port-channel1 ip address 10.10.10.10 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip ospf message-digest-key 1 md5 cisco123 logging event link-status no mp...

Hello, I am newer to snmp and I am trying to configure an snmp viewer to read specific traps. I am having a hard time wrapping my head around the oids and MIBs trying to find the ones I need, like chassis temp, CPU %s, Power supply etc. Is there an e...

Hello ,   I a new to nexus.   I've been tasked to put two nexus switches (C93108TC-FX) into VCP.   I am more a VSS guy.   I  have the following concerns : 1) how many physical ports will be required to bring up the VCP ( i am being confused between  ...

Community, We are experiencing an odd situation where 1 of our 200 vlans is dropping packets to end hosts.   Setup: Pair of Nexus 7K's via VPC connecting to a 4500 switch.  The 4500 is layer 2 only, with the SVI's installed via HSRP on the 7k's.  3 V...

Is there any? I could not find it in switches_catalyst-6800.zip.

Hi All,   We are using Cisco 3750 switch where we have configured one port as SPAN port . The port is generating lot of output drops even we have QOS disabled glogablly, other ports are fine. We can see the traffic on the tool connected in the SPAN p...

Hi Is there any command help me to show where specific Access-list Applied ?! which interface ?

I am experiencing this problem, can anybody help me to solve this issue.The temperature in the data centre is 20 degree celcius. I have attached the logs of it, please share a solution for it.   #show environmentwarning alarm: slot 3 has exceeded the...