Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
HelloI am working on a request to clean up alot of excess cabling in one of our IDF's. I noticed that many of the connections have no lights on them and probably haven't been used in a long while. I would like to know if there is a CLI command I ca...
Hi allcan anyone give me an example of what is needed for a good capacity plan, ie for a new WAN etccheersCarl
HiI have 8 switches (different models) configured in stack:Switch Ports Model SW Version SW Image------ ----- ----- ---------- ---------- 1 28 WS-C3750G-24TS-1U 12.2(55)SE C3750-IPSER...
Hello,What is the procedure to reset a 1941 router to factory defaults?Some background:I just recieved my1 1941 router. I connected it up to my Mac using USB. I got loged in using the cisco/cisco login and it said it will only work once and that I sh...
Resolved! 3750X Stack Issue
I have a customer that is having a problem with stacking 3750X's. They recently purchased a batch of 3750X's that could not be stacked with their original 3750X stack.The current working stack has a production month of December and was v.01. The new ...
I know this error is no affecting functionality, but I would like to resolve if possible.I have three sites connected as follows:Site A - HQ6509 with CATOS (switch)and IOS (MSFC)on MFSCint vlan 200ip address 10.10.10.1 255.255.255.248on SWITCHset vla...
Hi, I have a 6509E switch with dual 6Kw power supply that is logging "Power supply 1 input has changed. Power capacity adjusted to 2671.20W" then will bounce back to normal at random times from 1sec to 10sec. Is there a command to check what each in...
Hi,We bought Cisco sup engine WS-SUP32-GE-3B for 6500 switches 2 nos for redundancy. I have connected 6 systems on each sup engine ports.Anyone clarify whether both sup engine will forward the data while one is Master and other is standby ?RegardsS.R...
I need to secure a VLAN (33) from the rest of my network. Devices in VLAN 33 only needs to communicate with a particular server/site on the Internet. Currently I have the following 4 VLANs setup. Interface Vlan32description inside firewallip address ...
This may sound a very basic Question but I have hard time to figure out .I am trying to order External & Internal Compact 1G Flash adaptor for Cisco 6509-E 720-3B SUP.I do have Internal Flash which is 512MB.whie I wanted to upgrade both to 1G .I have...
;Hi AllII have a Cisco 887W, The config commands I would normally use are not being accepted.I need assistance setting up the wireless onthe router.Is the a tool where I can check old version of IOS against a new version of IOS to see if the commands...
I've recently brought up a Nexus 4000 and to my suprise it is not behaving like a FEX. I'm pretty sure sales mentioned that it would be able to be managed by my Nexus 5548 as if it were a 2148 FEX. Is there an option for it to be either an autonomo...
Hi AllWe have a Cisco Catalyst 4506 running:"Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(25)EWA14, RELEASE SOFTWARE (fc1)"I have configured the default gateway as:ip default-gateway X.Y.116.65However, when I ...
A server is generating a multicast message to address 230.255.255.235. A client is connected to the network through an access point. The client is running an application that listens for the multicast message. Will the access point support this p...
Dear respected , I need consult , we are going to implement DHCP snooping along withc DAI ( Dynamic Arp Inspection ) in our Network , my doubt is what will happen when the switch power turned off and truned on again>>> after reloading the DHCP bind...
