Activity in Technology and Support
FMC API Explorer - Unable to pull device configuration
FMC Version 7.4.2.1 (build 30)I am trying to pull interface and networking configuration using the container ID as requested - domain ID is also set. Keep getting:Response: {"error": {"category": "FRAMEWORK","messages": [{"description": "No data foun...
[Standalone and LED indicator] Air CAP1602i-C-K9
I'm new to cisco and want to bought Air CAP1602i-C-K9 as an autonomous/Standalone Access point into my house but I'm still puzzlef about this:- Can it be converted into Standalone firmware? - Did this CAP1602i Led indicator has single led color which...
Secure Client 5.1.13.177 network extension upgrade loop on macOS
Hello,On macOS 26.1, I install Cisco Secure Client version 5.1.13.177, after I give Cisco Secure Client - Any Connect VPN Service permission for App Background Activity, the network extension try to load, I receive the system alert to allow the netwo...
GUI interface on WLC
I am trying to connect to GUI interface of WLC but it is continuously showing "Server Reset Connection". I configured the management interface of WLC with an IP 192.168.10.10 and PC connecting with the WLC with an IP 192.168.10.11. The PC and WLC are...
CML - Link to Personal Email
Hello. I am not sure whether this is the correct place for my question but here goes. I have recently purchased CML Personal but I will be leaving my employer in the near future. I am confused about whether or not I will be able to link my Cisco acco...
Cisco Secure Client and Entra ID - remember the username
Hello, When using RA VPN with Entra ID SSO, is it possible to configure Entra ID to remember the username when the user re-connects? Every time a user want to connect, he is forced to enter his username/password and we want the username to be remembe...
IPTV multicast from ISP VLAN to default VLAN
Hello everyone,I’m working on an IPTV + Internet integration project for a hotel network, and I'm stuck on enabling multicast forwarding between an IPTV VLAN delivered by the ISP and my internal LAN VLAN.I would highly appreciate any guidance or clar...
Self-management of technicians for physical change of Cisco switch
Hello community, I'm looking to solve a relatively simple case study problem: basically, to automate the physical replacement of an IOS switch.Perhaps something with an Ansible server, Python, or something similar.I mention this mainly to avoid reinv...
How To: Cisco ISE Captive Portals with Aruba Wireless
How To: Cisco ISE Captive Portals with Aruba Wireless Authors: Adam Hollifield, Brad Johnson IntroductionPrerequisitesMinimum RequirementsComponents UsedConfigurationAruba Wireless ControllerWLAN CreationAuthentication ConfigurationRole & Policy Conf...
Emergency Alerts
CUCM 12.5We are seeking a way to send emergency alerts (screen messages, live or pre-recorded voice messages) to a subset of phones at once using CUCM. From what I can see, CUCM has an built-in option to integrate with Informacast and have read up o...
Resolved! I have a 3850 24pt poe switch and cannot factory default
I tried by plugging in and holding down the mode button, syst just keeps flashing green for over 10 mins. is there another way to do this? I changed isp's and the ip address changed from 192.168.1.1 to 192.168.0.1, so I need to reconfigure the switch...
Native vlan mismatch
I have two switches A and B connected via a trunk. Switch A has no native vlan configured and switch B has native vlan 16; so the second switch b is nownot reachableCan I configure native vlan on switch A and then when switch B is reachable, remove t...
Resolved! Is there a unique registry key when ThousandEyes has been registered ?
Great Evening ! How are you ? Great I hope ! I am trying to automate registering Cisco ThousandEyes Endpoint Agent in Lansweeper.Is there a unique Windows registry key when ThousandEyes has been registered ?I went thru the entire registry and did not...
CX Cloud: possibility to have a Dashboard with "Global Parameters".
At CX Cloud > My Portfolio, the Customer is able to check a lot of good info related to their Contract: It would be awesome if there was a Global tab with "Global Parameters", for example: A Customer with Cisco ISE 2.7 P10 would have the possibility...
IOS-XR ZTP expected behavior
I'm working through getting IOS-XR devices to ZTP.I'm using DHCP Option 67 to pass the URL for a ztp python script.The DHCP offer also includes DNS server options.It seems that if the URL uses FQDN in the URL, the ZTP script will not be downloaded.On...
| User | Helpful Count |
|---|---|
| 89 | |
| 45 | |
| 42 | |
| 34 | |
| 34 |
