Activity in Technology and Support
Ayuda para configurar SSID 2.5 y 5g | Help to config SSID 2.5 and 5g
Hola, necesito de su ayuda. actualmente mi AP solo posee la configuracion para una SSID de 2.5, pero quiero configurarle una SSID de 5G.He leido varios links pero me da susto hechar a perder la configuracion.Pido ayuda para que alguno de ustedes me d...
Multiple NAT DIA bug or somethink else
I found that Multiple NAT DIA stop working after reloadingMy config is very simpleVpn 10 - 172.25.10.0/24 via nat dia overload (isp1 and isp2 round robin)Vpn 16 - 172.25.16.0/24 via nat dia pool overload (isp1 and isp2 round robin)Service side interf...
Missing Visio Stencils for Cisco 8000
I recently downloaded the Cisco 8000 Visio Stencils.I noticed the equipment I was going to make a diagram of had missing MPAs and blanks.The following MPAs were missing.8K-MPA-18Z1DThe following MPA blanks were missing.8K-MPA-BLANK8608-MPA-BLANKI als...
Cisco UCS C240 BE M4 S2 | UCS-ML-1X324RU-G
Hello Freinds Pls Advise on the below RAM 32 DDR4 for Cisco UCS C240 BE M4 S2 if it's okay for this box UCS-ML-1X324RU-G - Cisco 1x 32GB DDR4-2133 LRDIMM PC4-17000P-L Quad Rank x4 Replacementthanks a lot
Cisco asa 5545XseriesHi,
Hi can someone help me with the configuration of ASA 5545Xseries? I have the router to the 0/0 and one pc on 0/1.I want to use dhcp to have internet access.Can you please give me a complete example cause the previous asa i had were using different co...
Subnet mask status incorrect? 2.1.2 Packet Tracer .. Simple Network
Ive spent hours trying to understand what I am doing wrong. I followed the instructions to a t. This is honestly ridiculous . 2.1.2 Packet Tracer - Create a Simple Network. Can someone helo me understand what I could have possibly done wrong? I do...
Resolved! Cisco ASA 5545 & 5550
Hello, can someone please help me configure these 2 ? I connect the router on the 0 int and at the 1 my pc.I want dhcp.Please help me.The commands are different from the 5510 and 5520 i had.
Resolved! 9407R switch Sup-1 question on redundancy
Hi guys,I have a 9407R switch chassis running with just a single SUP-1 module.However, we are bringing in a used secondary SUP-1 from another site, to add this into my switch as redundancy.The thing is, the old SUP still has old config from the other...
Cisco ISE related Vulnerability (CVE-2025-20267)
IntroductionSummaryWorkaroundAffected Products & Fixed SoftwareReferences The Portuguese version of this Article can be found at: Vulnerabilidade que afeta o Cisco ISE (CVE-2025-20267) . For an offline or printed copy of this document, simply ...
Resolved! Voice Gateway
Hi. I have a Cisco ISR921 router. Can I use it as a voice gateway to establish sip trunk connection with SBC?I don't have voice commands on that and I can't see UCK9 license on that.
NSO not using commit-confirmed to configure a juniper via netconf NED
Cisco NSO use netconf NED to manage some juniper routers."show devices device xxx capability" from NSO returns below line, indicating the router is a commit-confirmed capable router."capability urn:ietf:params:xml:ns:netconf:capability:confirmed-comm...
Network Automation Solution : How to save configuration file of Cisco Router/Switch devices using Python Script
import netmikofrom netmiko import ConnectHandlerdevice = ConnectHandler(device_type="cisco_ios", ip="DEVICE IP", username="USERNAME", password="PASSWORD")output1 = device.send_command("show running-config")save_file = open("Switch_running.txt","w")sa...
Failover Ethernet1/11 (Failed - No Switchover)
Hi all!I have a question about ASA cluster failover. Failover LAN interface shows the following error:CGD600167DVPN1/sec/act# sh failFailover On Failover unit SecondaryFailover LAN Interface: Failover Ethernet1/11 (Failed - No Switchover)Reconnect ti...
Integrating ThousandEyes with SolarWinds Loggly Using Custom Webhooks
OverviewStep 1 – Get your SolarWinds Logglycustomer tokenStep 2 – Create a custom webhook in ThousandEyesStep 3 – Assign the ThousandEyeswebhook to alert rulesStep 4 – Validate Alerts in SolarWinds LogglyAdditional Resources Overview If you use Sola...
Enabling Data Link Encryption for Mobility Tunnels and APs?
SCENARIO: A mix of physical and virtual Cisco 9800 wireless controllers in a wireless mobility anchoring configuration for guest tunneling of different SSIDs. The controllers are running 17.15.3 version of IOS XE. Approximately 150-200 APs in the ...
| User | Helpful Count |
|---|---|
| 185 | |
| 124 | |
| 95 | |
| 88 | |
| 78 |
