Activity in Technology and Support
FMC does not log HTTP/HTTPS Connection Events
Hi everybody; My lab consists one FMCv with version 7.4.2.3 and one FTDv in Routed mode with version 7.4.2.3. I have created an Access Control Rule with the following conditions: I have also configured the logging operation as follows: Now when...
Ports Required for SMTP access from DMZ
We have a Windows 2000 Adv Server on a DMZ interface of a PIX firewall. We are using native Windows SMTP services as a Front End server for Exchange mail. Our Exchange server has a SmartHost entry that sends outbound mail to the server on the DMZ. ...
FMCv License Upgrade
Hello We purchased new FMCv license to manage 10 devices and we already have FMCv license to manage 2 devices, both are attached to the same virtual account. i need to use the same FMCv i'm already using to manage 10 devices instead of 2. so, i need ...
Resolved! Interpreting Cisco 3850 Cable TDR test results.
Hello, I'm just looking to make sure that I'm interpreting that a cable run is bad for a new install before ripping it out & starting over. Trying to hook up a new security camera that will be using 15.4w. These are the following results, please corr...
Resolved! Macro for Room Kit EQ that mutes the mic inputs individually.
We have had a request for a macro to be created for a Cisco EQ device that allows one of the microphone inputs to be muted via the touch panel.The Cisco EQ system is using 2 microphone inputs on the codec, 1 for the ceiling mic and 1 that is connecte...
Install OS on new switch.
Our Educational District just purchased 8 (Refurbished) Cisco Cat 3560 POE switches to upgrade from the dated 2950 switches.We downloaded the newest OS from our Cisco Account, but now I am lost. Maybe it's me :)I start up the switch and connect via ...
IE3400 Ring Topoloy - CLI
Hello All,While configuring an MRP ring on Cisco IE3400 switches (non‑PROFINET, Layer‑2), I observed that the “gateway” field in the show mrp ring output, currently showing Status: Disabled.I have reviewed the publicly available Redundancy Protocol ...
License webex
Normally, if I buy a Licesen Register, do I need to buy an additional webex license?
Boot fail in switch: boot config file not found.. Loading "flash:/c100
switch: bootconfig file not found..Loading "flash:/c1000-universalk9-mz.152-7.E4/c1000-universalk9-mz.152-7.E4.bin"...Error loading "flash:/c1000-universalk9-mz.152-7.E4/c1000-universalk9-mz.152-7.E4.bin" Interrupt within 5 seconds to abort boot proc...
CBS250-48 fails to boot, enters "Embedded Linux"
Hi, one of our new CBS250-48T-4x switches fails to boot, when connecting via console I see it boots to some weird Embedded Linux environment, full console info in attachment, here is few first and last lines Few last linesmount: mounting ubi0 on /mn...
WLC 9800-L version 17.12.4 and Microsoft surface connectivity issue
Hi,I successfully migrated from Cisco Airwave OS to 9800-L IOS versoin 17.12.4, and everything is working fine with the exception of the Microsoft surface pro. All of my PCs (windows 10) and Apple Iphone devices are working great and they are using ...
Cisco 5508 Controller – LAG Mode
Hi everyone,I need to know if it’s possible to configure the Cisco 5508 Wireless Controller to use LAG mode with LACP.The controller is running version 8.0.133.0.I’m migrating this controller to new Cisco Meraki 9300M switches managed through the Mer...
VLAN issues
I recently replaced the core switch at one of my sites that consisted of two separate C9300-48Ts and three other off brand switches and installed a new stack with a C9300X-48HX, C9300-24S and a C9300-48T (running 17.12.5). This is a layer 2 network c...
Issue in Cisco Unified CCE Deployment – VM Configuration Mismatch
Hi Team,We are currently encountering an error in our Unified CCE Administrationt12.5 screen. The issue appears to be due to a mismatch between the "Unmatched Virtual Machines" and the "Allowed Virtual Machines" for the selected deployment configura...
VMware ESXi Patching
Hello, We have a few customers running BE6000 and BE7000 systems which were supplied with bundled versions of VMware ESXi. There have been some recent high priority CVE vulnerabilities (CVE-2025-41236, CVE-2025-41237, CVE-2025-41238, CVE-2025-41239) ...
| User | Helpful Count |
|---|---|
| 95 | |
| 89 | |
| 89 | |
| 75 | |
| 61 |
