Activity in Technology and Support
Download VPN Client from FTD
I have configured RAVPN and I am trying to access the outside of the firewall to download the VPN client. I put in the url setup to access to outside interface of the firewall but can't get any reply. I am pretty sure I have everthing configured as r...
Administrator account locked on Meraki console - MR46
I hope you are well. I'm having trouble logging into the console at https://n358.dashboard.meraki.com; my user account was locked due to problems with the two-step verification code.
Certificate - OCSP Responder Expires
I get the alert from ISE "Trust certificate 'Certificate Services OCSP Responder - FPISE01#00004' expiring in few days " but unable to find this cert anywhere in GUI !- what is this Cert for ? do I need it ?- where can i find and delete if not needed...
Deploying Cisco XDR Client Management on macOS via MDM
Deploying Cisco XDR Client Management on macOS via MDM/EMM: Resolving the Hidden .Resources Dependency Note on MDM/EMM Platform: This guide uses JAMF Pro as the MDM platform based on lab availability. However, the approach documented here — pre-appro...
Resolved! Meraki MR36 - End of Life July, 21 2026?
Dear All, My end-user (customer) has the entire office based on a wireless architecture with Meraki MR16 devices. Today, he became aware of the scheduled End of Life for the equipment MR36 on July 21, 2026. The customer knows that after this date, th...
Constant Alarms: ERS request content-type header is out-dated
Hello ISE Community, I am wondering if anyone else is seeing this same alarm for "ERS request content-type header is out-dated" even though the current ISE supported RESTFul API is being used per Cisco documentation. I am currently running ISE 3.3 Pa...
EVPN IOS-XR standalone interfaces (non-LACP / non-bundle)
Has anyone successfully tested or deployed EVPN Ethernet-Segment multihoming on Cisco NCS540 using the following model?standalone interfaces (non-LACP / non-bundle)dot1q trunk subinterfacesVLAN-based l2transport servicesper-interface ESI configuratio...
How to configure port monitoring (SPAN) on a Catalyst 2940, 2950, 2955, 2970, 3550 or 3750 series switch
ResolutionYou can analyze network traffic passing through ports by using Switched Port Analyzer (SPAN). This sends a copy of the traffic to another port on the switch that has been connected to a SwitchProbe device, another Remote Monitoring (RMON) p...
UCS - 220 M5 - Impossible to boot on HUU 4.3.2.26 from KVM mapped DVD
Hello,We need to upgrade CIMC to last version and I get a uncorrect signature message when trying to boot UU 4.3.2.26 from KVM mapped DVD.I can't disable secure boot, but I can set it to Legacy mode (instead of UEFI), no change.
ACI version 5.2(7g) CIMC compatibility
Hello,I have a query regarding upgrading the CIMC firmware on an APIC L3 cluster (C220M5).APICs are currently running ACI version 5.2(7g), CIMCs are currently running 4.1(3f)Due to a vulnerability I would like to upgrade the CIMC on each APIC to ver...
Resolved! cisco catalyst center vm cluster deployment
Hello everyone,I'm going to deploy Catalyst Center VM version 2.3.7 in VMware ESXi, and I have a question regarding Catalyst deployment How many VM node I need to deploy the Cisco Catalyst Center VMs in cluster mode for HA? best regardsYounes
WXCC - Supervisor Call flow - Early closure
Hi All, I am trying to find the best solution to enable a Supervisor to close the contact Center early, by dialing in and adding a PIN. I am struggling to find any documentation. Can anyone point me in the right direction, please?
Multicast RP placement - MSDP vs anycast
Hi AllAttached a high level diagram of our setup. As of now, the existing RP is configured with Anycast with MSDP , and is not in PATH of the SPT (shortest path). Incase the RP goes down, the existing SPTs are not broken, and any new receivers, will ...
New filtering, Code Exchange AI repos
New filtering now available for Code Exchange AI reposNow you can filter MCP servers and AI agents based on who developed them. We have two optionsDeveloped by Cisco - product-team MCP servers tend to be a more stable choice, and most of them are rem...
like to conect cisco Network tech support on ARP Proxy and NDP support
like to connect to speak to a cisco Network tech support on ARP Proxy and NDP supporting L3 switches
| User | Helpful Count |
|---|---|
| 93 | |
| 74 | |
| 71 | |
| 52 | |
| 40 |
