Technology and Support

Meet and connect with other members who use Cisco Technology
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Browse the Community

Cisco Software

Cisco Software training materials and resources for Enterprise Agreements, Smart licensing and Smart...

4749 Posts

Cisco Start

Engage with your peers and Cisco about enterprise-class technology tailored to small and medium-size...

232 Posts

Collaboration

Engage with your peers and Cisco about collaboration products such as contact center, IP telephony, ...

216953 Posts

DevNet

Connect with other Cisco technology experts on topics of automation and programmability of Cisco pla...

28132 Posts

Data Center and Cloud

Professionals using or considering Cisco data center technologies can join the conversation to discu...

43693 Posts

Internet of Things (IoT)

Collaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet ...

248 Posts

Networking

Collaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Arc...

291091 Posts

Online Tools and Resources

Find tools and resources to streamline your service and parts logistics questions, technical documen...

8389 Posts

Security

Explore the security forums and share your expertise about firewalls, email and web security, Identi...

202848 Posts

Service Providers

Explore information and join discussions with peers and Cisco about Next-Generation Internet, MPLS, ...

17369 Posts

Services

Interact with peers and Cisco about Cisco Services including design, analytics, CSR and ServiceGrid,...

5686 Posts

Wireless - Mobility

Connect with peers and Cisco on all aspects of wireless tech including security and network manageme...

58410 Posts

Activity in Technology and Support

Hi, beginner question. Is this desgin ok?

Hi all, as a beginner I know this diagram might be too much and I aim too higher but I want to know if the diagram is correct and if i can configure so it will work properly.  So I need to make a project for uni. The project is to design a high redun...

Duras by Community Member
  • 91 Views
  • 1 replies
  • 0 Helpful votes

CCNP - Switch Suggestions

Hi. I am studying for the CCNP Encor and up until now I have been using GNS3 and eve-ng. I'm now looking at purchasing small physical switches as I am tired of learning that not all commands/functionalities work on simulated environments. Due to spac...

Rygo by Level 1
  • 49 Views
  • 2 replies
  • 0 Helpful votes

Isolate VLAN X from other VLANS

Hello Together,we have a Catalyst 9500 Core Switch and I wan to Isolate a specified VLAN (VLAN 5) deny to connect to all other VLAN. Here is a simple configuration and explanation what the result should be.VLAN 2 (Server) 10.1.2.0/24 Gateway VLAN int...

ralpho1 by Level 1
  • 59 Views
  • 1 replies
  • 0 Helpful votes

RV260, WAN ports 80 and 443

Hello, I need to open WAN ports 80 and 443 to my own internal services, of course with proper rules, I've found some difficulties.It looks like both ports are currently listening for different processes, maybe internal to the router.I've tried to ove...

Cisco ISE - Sponsor portal

I have a distributed setup with 6 PSN.I have configured the Gi0 for MGMT and Gi1 for guest portal.For Guest portal I have selected Gi1, and I am able to access the portal using https://PSN_Gi1_address:8443.I am able to access using the IP address of ...

iran_0-1699956504116.png iran_1-1699956614144.png iran_2-1699957413418.png
iran by Level 1
  • 1634 Views
  • 2 replies
  • 0 Helpful votes

EOL of ASR1009-X?

I see that the lower ASR100x-X routers are already EOL. For the ASR1006-X and ASR1009-X there are no EOL dates out. Does anybody have any information on the expected lifespan of these components?

mat1458 by Level 1
  • 66 Views
  • 2 replies
  • 0 Helpful votes

Cisco 9606 - C9600-LC-48YL jumbo frame problem

Hi,we do have migrated our Cisco 6807 to cisco C9606R.we are in version 17.12.5.Since we have migrated we have a problem with Hitachi server Hearbeat connected on C9600-LC-48YL line card.we have the following configuration :NAME: "FiftyGigE1/1/0/20",...

jerome-mi by Community Member
  • 242 Views
  • 9 replies
  • 0 Helpful votes

New to network programing

I'm exploring network programming because I've got a project where it seems like it would be critical / necessary. I want to develop an automated way to backup the running config, diff it to the last stored copy, store / version if different, and mos...

Aggron by Level 1
  • 134 Views
  • 5 replies
  • 0 Helpful votes

Resolved! Install leaf switch image from CLI?

Hello,We're trying to reinstall the ACI leaf images via CLI due to a complete upgrade failure but I forgot the commands and it's definately not in the ACI upgrade/downgrade guide as that's more for upgrading. Our leafs are out of the box so no reason...

KVS7 by Level 1
  • 897 Views
  • 5 replies
  • 0 Helpful votes

Dual ISP on single FDM

Hello,My setup is a Cisco Firepower 1120 FTD version 7.6.2.1-3  (FDM). We have 2 ISP outside interfaces. For this we'll name them ISP-A and ISP-B. So currently we have our default internet traffic as well as VPN going through ISP-A. We want to make i...

Jdogg1985 by Level 1
  • 301 Views
  • 5 replies
  • 0 Helpful votes

ISE BYOD DNS/Certificates

We are looking at setting up BYOD using ISE. We already have a guest SSID configured and plan to use a new BYOD SSID (single SSID method). My question relates to the DNS name and certificate configuration for the BYOD registration portal.My original ...

pinglis by Level 7
  • 51 Views
  • 0 replies
  • 0 Helpful votes
Share your Expertise

Level up by answering questions in your area of expertise.