Technology and Support

Meet and connect with other members who use Cisco Technology
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Browse the Community

Cisco Software

Cisco Software training materials and resources for Enterprise Agreements, Smart licensing and Smart...

4688 Posts

Cisco Start

Engage with your peers and Cisco about enterprise-class technology tailored to small and medium-size...

229 Posts

Collaboration

Engage with your peers and Cisco about collaboration products such as contact center, IP telephony, ...

216829 Posts

DevNet

Connect with other Cisco technology experts on topics of automation and programmability of Cisco pla...

28051 Posts

Data Center and Cloud

Professionals using or considering Cisco data center technologies can join the conversation to discu...

43593 Posts

Internet of Things (IoT)

Collaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet ...

247 Posts

Networking

Collaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Arc...

290755 Posts

Online Tools and Resources

Find tools and resources to streamline your service and parts logistics questions, technical documen...

8352 Posts

Security

Explore the security forums and share your expertise about firewalls, email and web security, Identi...

202471 Posts

Service Providers

Explore information and join discussions with peers and Cisco about Next-Generation Internet, MPLS, ...

17336 Posts

Services

Interact with peers and Cisco about Cisco Services including design, analytics, CSR and ServiceGrid,...

5668 Posts

Wireless - Mobility

Connect with peers and Cisco on all aspects of wireless tech including security and network manageme...

58311 Posts

Activity in Technology and Support

Room Navigator not pairing to Codec Plus

We are in the process of replacing all of our Touch 10's with Room Navigators.Out of the 80 or so we've replaced, 2 rooms are having issues.Basically, any room nav connected to 2 Codec Plus's in particular are giving the error: "This Touch Panel Is U...

Resolved! Parallel Block to prallel process a loop

Hi everybody,In my workflow I am building a list of SSIDs to be processed and this is sequential, I am thinking to use the parallel block to create the SSID list in a way that would be similar to use Async in python but I noticed that using parallel ...

Dynamic vlan using Cisco ISE

Hi all,we have deployed voice solution across the estate using dynamic vlan via Cisco ISE. All the switches configured with vlan 5 as the default vlan and voice vlan will be vlan 488 ,deployed via cisco ISE using dynamic vlan.My question is , if both...

1562 RAP/MAP Migration AireOS to IOS-XE

I am planning a migration of APs on an existing 8540 series AireOS WLC to a 9800 IOS-XE WLC.  The indoor APs are straightforward and I've done those migrations several times at this point. However, I've never migrated APs configured as bridges from A...

AlexZmann by Level 1
  • 49 Views
  • 1 replies
  • 0 Helpful votes

service-routing vs mdns-sd Gateway C9300

Hi everyone,I’d like to set up an mDNS gateway on my Cisco C9300-A, filtering by instance name.Suppose I have three different networks, X, Y, and Z, where VLAN X is a service VLAN.I’d like VLANs Y and Z to be able to see only certain services availab...

rcamilletti by Community Member
  • 43 Views
  • 0 replies
  • 0 Helpful votes
Share your Expertise

Level up by answering questions in your area of expertise.