Activity in Technology and Support
Client authentication issue with large certificates
Hi! We have a strange issue. We use 9800-40 WLCs in HA-SSO deployment model. There is an WLAN network, clients authenticated by an external RADIUS server using certificates. If administrators use small certificate chains, authentication works perfect...
Acces to the Cisco Support API's (Console)
I am a developer at NTT Data Germany and need access to the Cisco Support APIs. At the moment, my permissions are not sufficient for the API Console. Who can grant me access?Regards harald.glaeser@global.ntt
XR Vulerabilities on OpenVuln API
Hi,Is there any way to fetch IOS-XR vulnerabilities by version on the OpenVuln API endpoint? It seems that versions for XR aren't tracked, and neither are versioned vulnerabilities.Any input on if this is supported, or possible known workarounds?
Resolved! Question about default-information originate
Hello there! From what I understand, the default-information originate should generate an OE2 default route only if there is already a default route in the routing table.My question is, Would it still generate a default route due to the default-infor...
Desk Pro does not turn on, keeps blinking white
DeskPro was used primarily as a monitor (without any network connectivity) and it stopped working (nothing on the screen).I gather that it is not even booting up, since the white LED keeps blinking (every 2-3 seconds).Oddly enough, it doesn't seem li...
Cisco 9861 compatible headsets
We use various Plantronics and Poly headsets in our environment. We're about 30% cisco 7965's and 70% cisco 8851's. We are going to purchase Cisco 9861's for a new site and we're looking for compatible list of headsets for these newer phones. I'm n...
WLC 9800-L version 17.12.4 and Microsoft surface connectivity issue
Hi,I successfully migrated from Cisco Airwave OS to 9800-L IOS versoin 17.12.4, and everything is working fine with the exception of the Microsoft surface pro. All of my PCs (windows 10) and Apple Iphone devices are working great and they are using ...
Resolved! VPC-Port-Channel-packet flow-SVI
Hi, everyone, Hope you are good> I'm working with two Nexus 9K switches configured with vPC.Both switches (core-core L3) (TOR-TOR L2) are connected to an access switch via a port channel (one link from each Nexus). The access switch has VLANs 10 and ...
WLC-9800 - AP C9136I-ROW - Slot 2 cannot be enabled
Hi,I have C9136I-ROW joined to the 9800 controller os 17.12.5.It is working fine inSlot 0 : 2.4Slot 1 : 5GHzSlot 3 : 6 GHzI can disable/enable all these three but the problem is for slot 2 that is disabled by default and I cannot enable it, I tried t...
Using "vlan dot1q tag native" and Meraki gateways
Hi, I have a client who is using the command "vlan dot1q tag native" on their Catalyst switches (causing all packets even on the default VLAN to be tagged and require tags), and Meraki MX105 firewalls. Packets leaving the MX105s are tagged on all VLA...
Stopping Brute force VPN attempts from devastating our NPS server
HI We have an ASA 5525 firewall and it's currently being attacked by brute force VPN attempts. This is affecting our NPS and causing it to crash. The outside interface has a simple deny any any rule which is blocking everything however the firewall s...
Resolved! ISE 2.6 Live Logs Blank Popup
Has anyone ever seen an issue with ISE 2.6 where when you go to the Radius Live Logs page, you get a popup box that is blank with just a continue button. After clicking the continue button, the Live Logs don't load any data. Just stays stuck on fet...
Query Regarding Endpoint Visibility via Cisco ISE
Certainly! Here's a rephrased version of your message in a more formal and concise tone:Subject: Query Regarding Endpoint Visibility via Cisco ISEHello All,In our environment, CLI access for network devices (switches, routers, etc.) is authenticated ...
Resolved! SSO/NSF with StackWise virtual
Hello,Can we configure SSO/NSF betweent two 9500 paired using StackWise virtual and each having a single RP?
Entra Synced Users can't sign into Windows
Here is a run down of what has been done and the Issue i keep running into:Fresh M365 tenant and DUO tenant createdCreated users in M365 then setup Entra Directory sync and run that to pull into DUOCreate a protect an application for RDP with simple ...
| User | Helpful Count |
|---|---|
| 87 | |
| 79 | |
| 73 | |
| 65 | |
| 63 |
