Activity in Technology and Support
recommend switches fiber
Hi I have a question which switches do you recommend 8 ports 10GE POE please
NDFC multisite question
Hello experts.I'm new to NDFC and got stuck for several days in a seemingly straightforward task in a super simple multisite setup between only two BGWs -- one at each site (each site's fabric also has a spine and a leaf, that's it). The two BGWs are...
Routing
Hello office working well, i cant entry ssh via private address, when i try connect via global address i coudn't i will start trublishooting everythisg is good, i Guess ISP will block ssh incomming or any filter to my private ip address, Thanks in ad...
Active Speaker dedicated output
HelloI have a Cisco Codec EQ with an on prem system (Pexip), is it possible to have an an output dedicated to 'active speaker' full screen, switching between far end video and local video based on whoever is speaking?
D320 Duo Release Notes for August 1, 2025
Hello everyone! Here are the release notes for our most recent updates to Duo. Public release notes are published on the Customer Community every other Friday, the day after the D-release is completely rolled out to commercial deployments. You can s...
IKEv2 Remote Access VPN Failure to Connect
Good evening,I previously had an IKEv2 Remote Access VPN tunnel working properly on an ASA 5515-X but apparently made some changes that have broken this functionality, so I appreciate any assistance that can be offered in restoring functionality. I h...
Show calling number instead of wireless caller for alerting name
Is there a way to show the calling number instead of just wireless caller or the alerting name?
X2-10GB-SR cannot establish link with Mellanox ConnectX-3
I have X2-10GB-SR 10Gb modules plug into Cisco WS-C3750-E layer 3 switch and Mellanox ConnectX-3 10 GbE adapter installed in ESXi 6.7 server (Dell PE R710). Both ends connected with LC-SC fiber optic cable. ESXi server can detect Mellanox ConnectX-3 ...
CCW Export in format B2B XML
Hi,I need to export from Cisco CCW in B2B XML format, but I can't find the option. The default XML format doesn't work; it must be B2B.Does anyone know how to do this? Thanks!
two ISAKMP SAs
Hello everyone,I configured GRE over IPSec in transport mode, and wanted to confirm the configuration. I was wondering, why do I see two ISAKMP SAs on each router? Shouldn't the ISAKMP SA be bidirectional? It seems like I have here two unidirectiona...
What would be the use cases for using more than two VLAN Pools?
Just as title suggests, I am trying to come up with use cases that requires more than two VLAN pools for a single Tenant ACI fabric (single site, multipod or multisite)... I typically have one synamic VLAN pool with static entries defined for physica...
no internet connection
I have a problem, I can't get an internet connection on my switch 3560G
PCCE Outbound Dialer - Call Details Report
Dears,This is regarding a PCCE environment, version 12.6(2).We have the Outbound Dialer successfully configured and working properly.We are currently working on a report to display the outound dialer call details, including Agent Name, Extension, Cal...
Wired 802.1x issue with Jumbo frames
Hello,If I turn on jumbo frames wired 802.1x port authentication stops working.I have MS Windows 11 client, Microsoft NPS as a radius server and C1300-48T-4G switch with lastest firmware 4.1.7.17 (also tried with C1300-48T-4X). Jumbo frames are disab...
Resolved! Low Impact mode
Hi i`m using ise ver 3.4 with native supplicant i was trying to apply low imacpt mode , the problem is when i apply the ACL the user cant take ip or anything that i allow in ACL , but when i writh this CMD (authentication open)under the interface hi ...
| User | Helpful Count |
|---|---|
| 119 | |
| 87 | |
| 72 | |
| 71 | |
| 64 |
