Dear friends, i am in a verg big trouble if any one suggest mi any idea,my setup is like this3825 (ISDN/FXS) ==> CALL MANAGER 6.1.3 ==> Phonei am using fxs to connect to a VoIP gateway which takes SIP setting for some ITSP, my account is getting ...
Dear friends, i am in a verg big trouble if any one suggest mi any idea,my setup is like this3825 (ISDN/FXS) ==> CALL MANAGER 6.1.3 ==> Phonei am using fxs to connect to a VoIP gateway which takes SIP setting for some ITSP, my account is getting ...
Hi everyone!A customer is trying to use a Sony E880 camera plugged into an Osprey 240E Capture Card with their Movi. The capture card appears in the list of Video devices in Movi, but he can't see the video from the camera. I'm inclined to think th...
Hi,Please give me the steps need to be performed on Lotus note, CTMS and CUCM to add the new CTS1300 in the network and the prerequisite.Thanks in advance....Regards,Lal Mohammad.
Hi,We have three CTS 3000 and two 1000 and all of connected each other through MPLS and working fine.But we want to shift these system on new HO and new branch offices.Because HO and branch offices is shifting to anathor location due to some reason.S...
Hello, Is Microsoft Windows Small Business Server 2008 supported as the LDAP, AD, and MS Exchange server for Cisco TelePresence Manager Ver. 1.7? Thanks, AA
Hi allWe have a DOA TP product onsite but when I log the serial in the TAC service tool it says the tool is only for items that have a service contract.Is there a seperate tool for DOAs with no service contract?CheersSteven.
I have following setup configured: Nortel PBX---E1-->CISCO Router----->CISCO Router (FXO/FXX Port) --- Having problem of dropping call exactly after 2 minutes and 45 second. Analog set located at remote site use 9 to access PSTN trunk installed a...
I have 2 Mitel PBX's that currently communicate over channels 19-24 of a PtPTt1. The Routers are configured to take 19-24 and point them out another T1 interface on the router where that is directly connected to the PBX T1 interface. these 2 MItel PB...
Hi there,I have been working with Axis IP Cameras, but for a new project we are going to use Cisco IP Cameras (Cisco 2500 IP Cameras).Axis IP Cameras offer serveral HTTP commands in order to get current image (jpg) or start a live video stream. Examp...
Hi,I am new to Telepresence, and I got a job to establish the environment of Cisco Teleprence WebEx One Touch Meetinig. have got equipments as below:MCS-7835-I3-ECS1, CTS 3000 codec; from the docs seems there are server/service like CTMS, CT-manager ...
hi,i have just received from cisco demo depot cuvc 5100 which is not booting at all. the reset LED is red.it hangs after 1% saying can't file a file (don't remember the exact name).however keeping pressed RESET button for about 15 seconds moves me to...
Hi,We use CTM (1.6.5.0) in our environment. Most of the users use web outlook to book the meeting. If they book a re occurance meeting and try to modify it for a single instance with additional rooms a new meeting shows up with the same subject and t...
Thanks for checking out my post, I have inherieted a Cisco VOIP network which I have the basic knowledge of it. We just had an issue arise where when a user dials an external number there is about a 5-10 second delay before the number will actually ...
Greetings,Anyone knows if is possible to configure a PIN code for TelePresence rooms ?Thanks
Hello all,My customer asked the following question, does anyone have the answer to this? "Along with our network operations group, I have been collecting wireshark traces of media generated by Tandberg endpoints varying from C20's, C40's, C90's, ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 08:22 AM | ||
04-25-2024 05:00 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |