We have deployed a standalone TMS with TMSPE installed. We want to add it to the domain to integrate users but our server group would rather the name of the server be changed to more a of a standard they utilize. Is there an issue with simply chang...
Forum Posts
Hi, May i know if Spark Board 55 and 70 support H.323 and IP based calling method? If the spark board is only going to be used for internal call within the organisation. How can this be setup and can anyone provide the guide? Thanks. jimmy
I need to know how many video calls it is possible to make with the sx-20 with multisite license, we tested 3 with video worked and another 1 with connection, is it possible 4 video calls? I have the following configuration:Xsta sys* S SystemUnit Pro...
Resolved! SX80 not picking up IP after restart
Upon restarting SX80 codec on two of our meeting rooms no IP address is picked up by the codec. There isnt any issue on the network infrastructure side and all ports are tested. Tests carried out: Factory reset twice from codec, twice from touch pan...
Resolved! Cisco Expressway-C
Hi All, Can any one help me to understand the below. 1.What is the purpose of having Cisco Expressway-C?2.If i am deploying Mobile and remote access for jabber VPN less access from outside then,why do i need Cisco Expressway-C?.3.Can i register 3rd p...
I want to create a simple one person to another person meeting on telepresence but that need the VSOM server.
I am so darn frustrated with CISCO _Telepresence products. OK Running TMS 15.4.4 on Windows 2012 server and another SQL Server. I add a system example: 10.10.10.4 ... so what happens In the window when it's trying to add the system it comes back ...
Hi All,We have recently acquired a DX650, DX80, MX300 and MX700 for our meeting rooms and noticed that we are unable to record the MX300 and MX700 devices using active recording methods.The DX650 and DX80 devices have the options and ability to recor...
We are looking to reboot our entire VC codec farm on a weekly or monthly basis, Is there a way to automate this within TMS? Our codecs consist of SX10's 20's 80' and some legacy Polycoms
How to download the VSOM server, How to resolve this error in VSOM downloads
Hi, we are getting message everytime when we restart SX20 as attached . We have not configured any Domain and DNS in SX20 and is working as standalone device. when we configure say 1.1.1.1 in Server1 Address under DNS from GUI , we get 1.1.1.1whil...
We have observed that our C 40 device not responding and it went to Maintenance mode. I can see only Maintenance, Recovery and tools options in Web interface.
If I don't have a Multisite license for SX20, Can I do video conferences using MCU 5320 and sx20 registered to CUCM (v8.6.2) with MRGL?
Hi, We have SX20 & C40 registered in call manager 11.0. Multipoint mode in codec is Auto & in call manager is Use Endpoint. Codecs are having MultiSite license. SX20 software version is TC7.2.0 & C40 software version TC7.1.1 We have also MCU Codian...
Resolved! VCS/Tandberg Patches x6.0
Hello Forum, I have a customer using VCS x.6 with hardware version 1.0. No support contract in place now. Customer want to update the security patches for VCS Control and VCS Express. There is no immediate intention to upgrade software. Howeve...
