Good day all,
I know that the ISDN GW 3241 is EOL and that the preference would be to use B2B IP calling.
However I have a customer that has a requirement for VC with both ISDN and IP capabilities, and they have acquired two new ISDN 3241's with two ...
how to setup dx80 do not auto fullscreen when share monitor to pc?
Because after auto answer call the DX80 screen become auto video fullscreen and have to select PC icon then change to PC share screen.
Hope after auto answer the DX80 screen still ke...
Hi Netpro'sI have an interesting problem. Since upgrading from v4 to v7 I can't dial polycom systmes that have the format IP##Alias (90.12.132.12##9016)I have a search rule on my VCSE that looks like this (rule name=polycom test ! source=any ! mode=a...
Hi all,
Our customer changed their TX9000 admin login credential but forgot the password. I tried the default login
which was : admin / cisco but failed. Are there any ways to reset the password? Thanks! By the way, client told us no...
Hello,
CUCM 11.X with conductor and TP server 410v
How many video streams can we have in one conference ? I see that there is a layout 4x4 so I am assuming that the maximum video streams are 16. Can we have more ?
The rest of the participants are ...
gents,
I have an issue with Cisco sx80 cameras not switching automatically when it come active, if we move it manually then put the device to standby it switching to standby position automatically!!
what could be the issue ?
Hi all,
I have setup a UAT setup for CUCM 11.5 and CMS 2.1.3.
I have configured conference bridge as Cisco meeting server. I have also updated Call Bridge and CUCM internal CA signed cert on the call manager and CMS as instructed on the white paper....
Hi Guys,
I recently installed a SX in a fairly new conference room and encountered issues while trying to share content on screen from Laptop. They get a message saying resolution unsupported.
After contacting the personnel that ran the cable under g...
Step by step recreation of issue.
Host schedules in Outlook a WebEx and adds a TelePresence Conference Room.Host logs into local WebEx with Desktop Computer.TelePresence Conference Room receives the “Green Join Button”When an attempted is made to...
Hi
I have a problem in case of detecting DTMF
We have got a SIP Trunk from ITSP and everything is ok except DTMF.
The sip trunk is between ITSP and Cisco 3945 Router
ITSP <-> 3945 <-> CUCM 10.5
I test all of method such as rtp-nte , h245-alphanumeric...
I have issue of content resolution with cms server
The sx80 transmit content is 1024x768 but the sx20 receive content is 1920x1080
Does cms server not support sending 4:3 content (1024x768) to endpoint ?
cms server (version 2.1.5, version 2.2.2)
S...
Which is the procedure for the reservations in the TMS to be consecutive (1, 2, 3 ... etc) since they are currently assigned randomly.
Softwae version: 15.4.4
