Hello All,Kindly I need your assistance in answering the following question:If I have two video conference endpoints. Both are connected to the same network. Both are registered to the same CUCM.What will be the call flow for them to have an internal...
Our customer sent us a defective Room Kit device (firmware version 9.14.3). There is not output on the HDMI ports, I cannot access it's web interface, neither can I ssh into it or even see it on the switch port. A hard reset using the recessed butt...
I am searching for a solution to alter a SDP header to not send video capabilities to a SIP trunk provided by an ISP. The reason is that calls from a Cisco Jabber softphone fails for outbound calls, I receive a "media not acceptable here": inbound wo...
Hi All,Has anyone ever tried wireless screen-sharing using a Webexboard and a Miracast device. In theory, I would think it should work given Miracast tries to replicate a normal wired HDMI signal (this is my understanding - that might be incorrect) h...
can we do Multiple livestreaming in CMS. If so, what mightnbe the requirements? TIA.
Hello, It have a SIP call in this morning, the meeting suddenly disconnect in VC room, but I can join the meeting again. I checking the callhistoy log, it show the following message; *r CallHistoryGetResult Entry 0 DisconnectCause: ""*r CallHistoryGe...
I need help in changing the IP address on the Expressway E. Would I do this in Vsphere in the console or in the GUI? Thanks.
I am unable to access below Cisco live cms link 404 not found error if any one have any document do let me know. https://cmslab.ciscolive.com/pod1/edge/b2bexpehttps://supportforums.cisco.com/index.jspa
Hi All, Just encountered a endpoint that is not showing the share button on the touch 10 panel. Ive gone through the GUI but dont see no options on enabling this button. Anyone have any ideas on how to regain this button ? Could it be cabling ?Tha...
Where would I find the EOF for the following Cisco video conference codecs? Cisco Webex Room KitCisco Webex Codec PlusCisco Webex Codec Pro
Hello, I have a Cisco SX80 installed in our conference room. We had a rolling power test over the weeked. So, we have power down everything and unplugged our VTC Rack. Upon powering the VTC Rack the SX80 is giving a Flashing "Power" light and a Stead...
Hello team, I have a "Cisco SX20 Telepresence" and i'm facing a problem that the camera moving left right and shaking continuously. Even after resetting the camera the issue still exist.- Current software version is "TC7.3.5.a93bdb1".- Downgrading th...
Hello So i have a C40, and there is no password, all types of default passwords haven been tried, but nothing works. Unfortunately it seems like the COM port has been disabled, already been trying with the COM port and with putty. So is there any ot...
1. issue on iOS client, under phone services it shows disconencted, under calling no error, under cucm device is shown unregistered, still can make and receive calls2. To isolate cucm , registration was tried from antoher cucm cluster as the home clu...
Good Morning,We are currently using CMS & CMM 3.12We suspect that some of the people who have PMP licenses assigned are not using the created spaces.However, CMM only seems to track the number of CMM licenses assigned to people / spaces. Is there a w...
