We have an EX90 running TC7.3.3 it is registered to a VCS Control via H323 and to a CUCM via SIP. We have a conductor registered to our VCS Control along with a number of MCUs. The EX90 is configured for Multiway with a chosen protocol of H323. We ...
Hello all. I am wondering if there is a way to run the EX60 without the touchpad and the "Lost Connection with Control Device" error. We are installing these in secure facilities in FocalPoint hardened cases and have no use for the touch panel. Th...
Hi, we have recently bought 2 3241 ISDN Gateways. The initial configuration was easy and calls are running in and out. Unfortunately the Gateway doesn't send the calling party number in the correct way to the isdn switch. For example: A DX80 registe...
I installed a SIP trunk yesterday, and wanted to follow best practices from the Cisco Live BRKUCC-3000 with regards to Dial-plan. The Numbers are coming in from the Provider as +E.164, and wanted to add DN's with the same +E.164 pattern: +1xxxxxxxxx...
Hello guys, I ran the following command xcommand CallHistory Get to extract the CDR from my SX80, but I noticed that the duration time is in days ago.I need to know if there is any other way to extract the CDR that allows me to know the exactly durat...
BE6K (1 provisioning, 4-UC apps) running CM, Unity Cxn, Presence.. want to add VCS-C & VCS-E for video conferencing. Will I need a another appliance to support VCS-E?
Hi All i'm ordering CTS-SX20-PHD12X-K9 with Touch 10 and power injector for it CTS-POE-INJ. I have clear that it includes ethernet cable but im not sure if it includes a power cable or i have to order it as spare. I also have a question about what a...
Hello, I am looking for an updated version of this document http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Video/TP_InterOp_v2.html#wp1244568 If this document is still current, are these bandwidth requirements both Tx and Rx, or just Tx...