TelePresence and Video Infrastructure

 One of our Client requires a Video Conference Solution with minimum number of Devices or minimum total cost. --  They have a Conference room (8 Chairs). They already have a 55' LED Display on this Conference Room with HDMI, VGA etc. --  They do not ...

Hi community!We are using more and more touch panels at our installations and I just noticied with TC6 and TC7 that you are not able to select the call method.For example you got a phonebook entry in your central phonebook with H323, Sip and ISDN add...

Hi. Sorry if this question has arisen before, but......I'm trying to connect a non-cisco mic into an SX20's 2nd mic input and struggling to make it work. Is it possible? Is there a pin out for the 3.5mm Jack (4 pole)?Also, when connecting the cisco m...

Hi All,I believe that Jabber Guest can only call a device that is registered to the CUCM.  However, if the number or SIP URI had a route pattern and the device was actually registered to a VCS-Control - would this work?  Has anyone done this? Thanks,...

Hi Friends, I have registered MCU 5310 to CUCM 10.x as conference bridge and I have added this MCU under MRG and MRGL deployed in device pool also. I have registered three quantities of SX20 to callmanager. One to one video call is working fine. But ...

Hi, I am trying to install Cisco TMS 14.6.2 on windows 2008 R2 server. Getting the following error when installing. Any help please. i have installed .net 3.2  Thanks

Hello,Is anyone aware of a timeout feature that can be set on the VCS-C or VCS-E's? I checked out the calls on the VCS-C while looking into another issue and there was a call that said it had been active for 3 days, over the weekend... I am not sure ...

The Far end video is Freeze on TV in chair person. The all other part of video is clear but , face is blurs in conference.we made a conference through MCU , more than 35 participant present in single MCU , there is issue only in main chair person TV ...

I have a client looking for TMS to send an email after a conference is completed telling them which codecs did and did not connect. We are using this to test carts that are supposed to be online 24/7 but keep getting unplugged.   We have setup a reoc...