TelePresence and Video Infrastructure

The following vulnerability seems to be accessible only via the web-based management interface of Cisco Expressway Series and Cisco TelePresence VCS. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-expressway-filewrite-...

Hi,What is difference between:Cts-sx20n-12x-k9  andCts-sx20n-c-12x-k9(-c-  in part number)  ?Is it different in HW or SW ?   Or?Regards,

I have 2 endpoints SX80 and Room Kit Plus, both registered to on-prem CUCM with latest software. When they dial to Webex Meetings, no outgoing video is sent. Observed from Expressway-C, the number of received video packets is very small from these 2 ...

Hello,We have  CUCM registered cisco DX80 video endpoints, we are using them to connect to the Webex meetings.We have set up our infrastructure for connecting our on-prem endpoint to be able to connect to Webex.2-3 mounts ago our public Cert is expir...

 Hello Guys,   We just installed two new SX20... I'm trying to fix an issue that was not there in previous models.   The unit will turn on automatically when there is people around even if the option “WakeupOnMotionDetection” is set to off.   I had c...

Have a SX80 joining video conferences via SIP gateway to Bluejeans video meeting or MS Teams/Pexip gateway. At different intermittent times (sometimes 10 minutes or 60+ minutes into meeting), the incoming video signal will drop and not display on the...

DearI have 60 SX20 on Branches, and CUCM 11.5 and CUP 11.5, Expressway 12.7 that Oauth Authentication is in disable state.the cucm cluster security mode is mixed mode.the problem is that when i want to register sx20 through mra to cucm the following ...

What would a fluctuating channel bit rate do to a video call?

Hello, I want to know if there is an API that allows you to retrieve the end of version date for Cisco IOS.the goal is to check if the version of the os is still update with a python script. thanks.

We have stopped using H323, using SIP 100% now. Customers are calling us now because there are seeing the H323 not registered. Is there a way to turn that off so the customer does not see it?