TelePresence and Video Infrastructure

Dear All,I have an authentication fail issue during endpoint sip registration to VCSC.VCSC event log say that user not found. But user was created in VCSC local database and that user credential is working for h323 authentication. On endpoint system ...

Where can I find the API for a cisco CTS-CODEC-PRI-G2R  (Tx9000)

I've come into a new environment with my new job and noticed that the TMS server has TMSPE installed, but when going to TMS general settings, I don't see the right dropdown. I only get Enable Cisco TMS Agents. I am on TMS 13.2 (looking to upgrade to ...

Hi,I have added 4 of my Polycom HDX 8000 Series to a TMS.The Trial TMS version being used is 13.2.2The Polycom HDX is running 3.1.3 I wanted to understand in detail as an end user of TMS, what are the functionalities in HDX that I can expect to manag...

Hi all,Right now we're running TMS 12.6.2 and going to update to 14.5.Our 12.6.2 Version is running on a Windows Server 2008 R2 (32Bit), we want to make a system upgrade as well and go to Windows Server 2012.My question, probably a little funny, how ...

In a scenario i have 1 publisher and 4 subscriber and 1 Moh server. It is a distributed architecture( IMAGE ATTACHED FOR REFERENCE) .1. Pub , 1 Sub and Moh servers are installed at a single location connected to DMZ switch.2. Similarly Sub 2, 3 and 4...

Hi all, We are planning install Cisco TelePresence Server MSE 8710 for our customer.we haven´t install this equipment, then we need know if is possible install the Cisco TelePresence Server MSE 8710  standalone, like a MCU, without a CUCM or VCS. Reg...

Dears i have 2 TelePresence SX20 , i need to call its using Names the TelePresence  IP 10.2.10.5 and 10.33.10.5 .i tried two options 1st i created 2 DNS record on my DNS but i`m not able to dial it using the name.2nd i change the Host name  on the de...

i want to implement Cisco BE6000 communication server in my office with around 8 phone connections. Can anybody tell me whats the bandwidth i need to make the system work efficiently?

Hi Guys,I know there are nurmerous threads about this on the forums however I am unable to find the answer from all the discussions and documentations..We have a DX80 registered on our CUCM 10.5.1..As described in the guides, these CUCM registered TP...

I'm a little confused about VCS and what I need. VCS, in its various guises, can provide:  - Mobile & Remote Access - Jabber Guest - SIP/H323 firewall traversal. I want all three features. Do I need 3 x VCS-Cs and 3 x VCS-Es to provide this*? Or can ...

We are trying to connect a SX20 microphone port to the output of a Polycom soundstructure C12.I'm wondering if anybody has been successful doing this?It looks like the SX20 has to be tricked to believe its microphone is connected.Maybe by sending som...

My customer has implemented XMeduis FAX server.  They are using this with IP capable multi-function units.  I have incoming faxing to these devices working just fine however outgoing is not working.  Debugs show that the call is not being sent out as...