TelePresence and Video Infrastructure

If 8710 blade is in remotely managed mode,the maximum capacity per blade is achieved with 12 screen licenses giving 12 x FullHD or 24 x HD or 48 x SD (w448p/480p30) or 96 x 360p resources. And 4 blades could be clustered. So the maximum ports are sup...

Hi,I am happy to announce that Cisco TelePresence Management Suite14.3 has been released. It is now available for download from cisco.com.Please see the software release notes before upgrading.Most new features in this release are about support for T...

Hi Geeks,I am posting this to understand "How stuff works". Below is the Design.i have a VCSc configured with SIP domain of example.com  (we have internal DNS server to resolve it)i have a VCSe configured with SIP domain of cisco.com  (we have extern...

I'm trying to do something very simple : upload a custom image on the Telepresence Server (version 2.3(1.55)) for the lobby screen and can't figure out anyway of doing so. Can't find anything on the web neither about that. Is it impossible ?It sounds...

Hi,Is it possible to build a virtualised v1.6 of CTMS and CTSM on UCS? Or is the minimum software revision 1.8?I ask because i need to migrate both of these servers from MCS to UCS and they are both currently on version 1.6; If i can build a VM insta...

Hi,I'm expreiencing an issue or bug on C-series endpoints and mostly on SX20 endpoints.Everytime you press the menu button on the TRC5 remote control it will also control the volume to down.Problem was encountered on TC5.1.x. I already tried upgradin...

I'm trying to understand the difference between the VCS Control and the MCU. It seems they both are used to for mult-party video calls. Can someone shed some light on this? Thanks

Hi expertsWhat does mean message bellow in VCS event log " httpd[30838]: [core:error] [pid 30838] [client 24.158.197.25:32943] AH00027: Buggy authn provider failed to set user for /, referer: "Thanksbr Oleksandr       

Responding to tender and within the requirements is "System should have Meeting Management Capability".Can someone provide information on what this is?Do we have it in our Cisco Telepresence portfolio.Thanks in advance.

Hi,I was just curious about the solution/design, I mean how I can design and evauluate out new design or recommendations from technical minds here.I am qouting MX300, I have some questions. We currently have tandberg setup at 4 locations, we need int...

I have been able to connect to all of my ISDN wall ports and make a video connection.As long as I use the 1st port from left of ISDN Link the connection is good. Using the 2nd Port no connection can be made.I can use the 1st Port and any of my 4 ISDN...

Hello,     Is there a way to enter a dial string when connecting to a Codian MCU bridge that would automatically enter the requested password for that said conference?Example: I have a conference ID on my bridge that is 5555. The password of this con...

Good afternoon, I have an SX20 with the dual monitor option key installed and is running TC6.0.1.65adebe.  Before upgrading to this software from TC5.something, during calls, my local room was displayed on the 2nd monitor.  Now during calls, the 2nd ...

Hi,Is there a direction for Jabber Telepresence Video (Movi) to support Iphone and also devices running on Android?Right now the only supported devices where PC, MAC, and Ipad tablet.Or is there a third party software (except from Polycom RealPresenc...