Resolved! Cisco Ip camera configuration
what is the basic configuration needed to install a cisco camera on a cisco 3850 switch. I guess I also need a display software to go with it. Please help. Thanks
Forum Posts
Hello all,At client’s sites and at our office we have several codec's, Roomkit, Roomkit Plus, SX80, that is giving a Certificate Expiration issue. I read the admin guides and tried to find similar issues online and here in the Cisco Community but cou...
We have a Large Video Conferencing room which uses a Codec Pro and 2 Large Leds Boards side by side for Video Calls.Once screen is for local and remote content. And the other screen displays the users that are within the call.Layout Options are simpl...
I have a requirement to allow Codecs to Add Participants into a CMS Host conference. I can achieve this with Conference Mode = Auto. However, this has a side impact for Ad-Hoc Conferences. When in Auto mode.. the device will attempt to host the confe...
Buenos Días; Estimado equipo de colaboradores Cordial saludos Hago llegar a ustedes la siguiente inquietud. Tengo una camara SX-10 configurada sobre un Control Hub. Puedo establecer comunicación con ella a traves de nombre o Dirección SIP. Se requie...
HelloWe have a dedicated vpn tunnel that Cisco Room kit endpoints are connected at each end. When making a cisco video call to the other end point the call connects ok with audio but they can't see me on the camera unless I place the call on hold and...
Resolved! REGEX ISSUE
Help Ok My CMS has seven digit cospaces on it. The CMS is Neighbored to my Expressway. When some for example dials 6511806 there is a search replace rule to send 65118(\d{2}) replace with \1@domain.com to the CMS and works fine. Now my issue is so...
Hi everyone,Our CMS version is 3.6.1 (CMS 1000) and we are trying to configure SNMPv2. Its a two part questions-1) For SNMP polling, right now we can add one subnet under a community string. If we want to add a second subnet, the only option I can se...
Resolved! Mexico DST change
As Mexico no longer observe DST all our endpoints in that region are now displaying the time incorrectly. Is there a way to update the TMS time zone database so they display correctly?
Resolved! Auto tracking feature with dual cameras
Hi ,I have a Webex Room Kit Pro with 2 P60 cameras. Will these cameras support auto tracking feature with the codec without any AV integration. Also during the video call can the far end see the output of both the cameras , like 2 screens one showing...
Dear Team,I am getting database connection failure on CMS, and ldap sync failure. I have attached error snapshot from GUI and syslog here. Any help on this is much appreciated.
Hello,I have a Cisco sx80 that has a expired certificate on it. When I logon to the administration manager and go to security and look at the current expired certificate the delete button is grayed out for me.. I am looking to regenerate CSR for cer...
What are the recommended settings on the new Expressway Protection feature? I see I can turn on HTTP proxy inspection and SIP inspections, do I want to "enable" all of these? All under Automated detection overview My setup is basic MRA, no B2B. Th...
The speaker track camera is now black, how do I troubleshoot it?
Hoping someone can help me out here... I'm currently migrating all our units from the old VCS (I know... Sad to see the back of the old Tandberg days) to the control hub.Currently have loads of Room Kit endpoints.Main VC providers:ZoomMicrosoft Teams...
