Unified Communications Infrastructure

Hi - wondering if anyone can help me here. We are running Unity 7 with unified mailboxes. We are going through an exchange migration at the moment and from 2003 to 2007. We are using Unity IP Fax version 2.0.031 - since we have moved the Fax-in, Fax-...

Hi,     Anyone here have a step by step guide on how to Setup Auto Attendant using Unity Connection 8.5 and CUCM 8.5. Thank You.

                   I'm researching what sort of information we can get from Unity Connection (we're on 8.6) using our SNMP management platform(we have solarwinds)I was looking through the values in CISCO-UNITY-MIB and noticed a variable called CiscoU...

Here is the setup:CUCM 8.6 Cisco ATA 187 (SIP)Panasonic anaolog phoneMoH is configured and working properly on all Cisco phones, however when we place a call on hold from our Panasonic analog phones we get silence, causing the other end to hang up. O...

                   what version of Unity connection supports Unified messaging/ single inbox for Lotus Dominos and what are the requirements. i have seen conflicting information.

We have recently upgraded CUCM from 8.5 to 8.62. We were testing the fail over and noticed the 7941, 7961, and 7971 phones are not accepting their firmware from  the publisher.  This is preventing those phones from updating properly and thus,  they d...

Hi ,i ' ve a problem , with a VCS Control and some Endpoint Polycom HDX.I use a TMS and 2 mediablade MCU registered on VCS.I connect various endpoint with ip address (in the VCS there is a Membership rules for the internal private ip address) , but s...

Hello world! Could you tell me, please, can I make interdomain federation with ICQ. Cisco.com doesn't say anything about this.And if yes, then can you give me some tips how it can be implemented (maybe some links)Thank you all.Alexander.

Dear all,am using CUCM-BE version 7 (centralized) . I have a problem while transfering the callor when using pickup at the HQ or at the branches.Phone A calls the extension of phone B .Then  phone B transfer the call to phone C and hangs up. When pho...

         I've seen other similar issues with the 'Refresh Upgrade Failed' error popping up, but can't some to find my error.  Has anyone seen this one?"Error detected in pre-boot phase.  Unable to revert to original version.  Change in software RAID ...

Since its now almost impossible to get unity licences, we are moving from Unity and moving over to exchange 2007, 2010 Unified messaging. I have my exchange setup working great for extension to extension calls (i.e.  call 1999 to get Exchange UM from...

Has anyone deployed and tested these apps on Xen Desktop 6.5?