Unified Communications Infrastructure

I just swapped out a CUCM 8.5 server with an 8.6.1 BE server.  I did a bulk export/import for the config and cleaned up whatever couldn't import.I have a few SIP phones, 8961 and 9971.  The problem on the new system is that after you press the direct...

46Tech_CME#service-module service-Engine 0/1 se46Tech_CME#service-module service-Engine 0/1 sessionTrying 172.16.1.2, 2258 ...% Connection refused by remote hostIve tried to shut the service-engine and reload the router, no success. I  tried to resea...

Hey guys,I have one pub and two subs (SubA and SubB) I want all the phones that are at location B and registered to SubA to be registered to SubB. Currently what I'm planning to do is to create another CM group where SubB is the first choice then Sub...

Hi, Is there a way of passing calls direct to CUC VM based on your CUPS presence status i.e. when status is Away or DND??Runnng CUCM, CUC an CUPS all version 8.5.x. Thanks

Hello Everyone,Just wanted to share my experience so far while upgrading to CUC 8.6 and the issues we faced and are still facing.Preliminary information:- Two physical CUC servers (pub/sub)- Currently running 7.1.3.32016-1- Upgrading to 8.6.1.20000-1...

Greetings;       Last week my CM Pub took a dive.   (data was un-readable, system restore CD laughed at me)I reinstalled the OS and wanted to download the last update that was on there.Turns out to be more of a problem just getting the update.   ( I ...

Hi,I want to configure a simply thing, but It doesn't works fine.All external calls arribe to my CUCM. here there are an Translation Pattern to redirect the call to Call Handler in Unity Connection.Now, This Call Handler reproduce the "Welcome". All ...

Can't browse Sub features services from Pub. I also can't browse Pub feature services from Sub with out getting the error below. I am running CUCM 7.0.2 on one server and both Pub and Subs as VM's.           Connection to the Server cannot be establi...

Hello all,We are in the process of migrating to an Exchange e-mail environment and at the same time trying to get everything ready for a CUPC deployment. The CUPS server was set up some many months ago, but still has not been put into production so w...

Hi,We have IPT setup in our customer location. With CUCM cluster and PSTN PRI for in/out calls and using microsoft exchange for VM.1. How about deploying Video Conferencing setup in the above IPT environment or do we need to take seperate BRI's for t...

Hello Guys,         Everytime I try to use Call Park and Meetme Conference I get a fast busy. Maybe I forgot to setup up something. I setup the the number scope for both. Do I need to dedicate a resource to them? I am running CUCM 7.0.2 on one server...

Hi all,I tried to install CUCM8 on VMware workstaion7, but failed.  It showed " ......the hardware you are using is not supported for this product ...." ( attachment vw error.jpg)i read some discussions in this community,  not sure if it is related t...