Which port should be opened when configuring Hyperflex site to site replication via WAN ? Regards Budi
Forum Posts
I am facing some issue with the product UCS C240 M4S Server, BIOS Version: C240M4.2.0.4a.0.042220151400 The Server is not able to detect the hard disk, i managed to change the working Raid Controller and Hard disk but still there is no any success. B...
I have a C220 M3 and I want to put in a few of the largest 2.5" drives that were available for that platform. I've found 1.2TB 10K 6Gb SAS and 12Gb SAS varieties but also stumbled upon a 1.8TB 10K (UCS-HD18TB10KS4K) which appears to be from the M4 ...
The blade is using the M81KR adapter. The LUN appears during boot. I boot up using a virtualDVD-ROM with Win 2008 iso-image. I then unmap the ISO and map the UCS drivers for M81KR for Windows 2008. Then it says the LUN is offline and it let's me onli...
Resolved! Possible I/O bug
Hello I've been working on a strange issue with VMware for a good while now where I'm seeing that virtual machines running any flavor of Windows and Windows Server, in our vSphere environment that runs on Cisco UCS blade and rack servers, are showi...
Man oh man is the documentation for the IMC Supervisor 2.2 API frustrating... I am trying to query the list of discovered devices to see if an IP is present. Im hoping the "/cloupia/api-v2/CIMCDiscoveredDevice/{profileName}/State/{profileName}" will...
hi, i need to replace 6100 series interconnects with 6300 or 6400 series interconnects as currently one of the 6100 series interconnect is faulty.kindly refer me some useful steps or documentation which would be helpful for me.
i just finished installing Windows server 2016 on one of the B series blade and now trying to set up network configurations. during the OS install, when it prompted me for VIC driver, i loaded the storage VIC, i also notice there's a network version...
Hello.I need to install a VMWare Hypervisor on a "NIM E-Series NCE" (FL-UCSE-VS6-HYP=?B).I don't know where to download this hypervisor.I have an ISR (ISR4331-VSEC/K9) with a "NIM E-Series NCE" (UCS-EN140N-M2/K9=?B).(This hypervisor will be used to i...
An installation of the ucs 5108 mini is stuck in discovery and unable to see the blade servers in slots 1 and 2. Efforts to download chassis logs is not succeeding either. Below are some of the errors being reported. [FSM:FAILED]: configuration of I...
Hello, we are running the FW 3.1(1g)A and UCSM Version 3.1(1g). As we can not disable TLS1.0 as shown in the UCS_Admin_Mgmt_Guide_3_1_chapter_0110.html we want to upgrade to 3.2.(3). Is it OK if I only upgrade Infrastructure FW to this Version or Do ...
Dears, I have just entered a pre-sales profile , i need to ask some some question related to the same. how i can size any server based on what requirement, if i m approaching a customer and if he is need of server then what question i have to ask h...
Resolved! VLANs in UCS Central
I'm using UCS Central 2.0, and have a new 6324 domain that we're setting up for a lab. It resides in our data center, and I'd like to use some VLANs that we have already provisioned from the network side. We have VLANs defined in root that are used...
I know it's under the Admin's tab, but the options are kind of confusing, does anyone have a straight forward instructions? i have the LDAP server and IP and the access level i'm about to grant, anything else i need?
We're working on installing Windows Server 2016 for our UCS B series blades on SAN LUNs. the installation process prompts us to load driver, i assume that's the VIC driver. I downloaded B series UCS Drivers package which contains VIC driver. Now i...
