Unified Computing System Discussions

Hi, we are suppose upgrade our existing UCS infrastructure to the firmware version 2.2(6c), I have opened a tac case in order to get cisco expertise advice on behalf of this upgrade, we are running a highly critical system at a leading airline in sri...

I have a Cisco UCS C220 M3S with no flex flash installed. It has a 500 GB SATA HDD. I need to install Windows 2008 Server 64 bit and Cisco TelePresence Management Suite.I can not see The HDD in the server inventoryWhen I try to install the windows OS...

Hello, I am trying to access the server in UCS manager but getting error as shown in attachment. Can somebody help me to know why is this error coming? Thanks in advance. Qamber

Hi UCS Community! We're having an awfuly hard time getting a Service Profile configured that will both boot from SD card and also configure the local SSDs such that they are available to ESXi for Virtual Flash Read Cache. Any advice or if there is a ...

Does anybody know of issues upgrading our ESXi host to 5.0.0U3? Evedently there are security issues with ESXi 5 that requires the patch. Any insights would be appreciated. Thank you

Hi,the Palo Adapter (M81KR) supports only 54 dynamic vnics per server-profile.Stupid question: Does this mean, in a vm-fex (formerly vn-link in hardware) environment, i can assign maximum 54 VMs per ESXi Host? Currently we have the problem, that a vM...

Greetings, We have a UCS consisting of (2) FI 6296UPs, along with (12) B200 M3 blades. Also in the datacenter are (2) MDS 9148s and a VNX 5500. We had (2) C240 rack servers, but the company that did the install bought them back because they couldn't ...

I recently received and configured one of these servers. During my initial boot up and build process, I went into the CIMC configuration and set the IP info. Later on after I had the OS built, I plugged a cable into the CIMC port on the back of the s...

how to solve this issue. my ucs cannot find vmare to load.

Hi Experts is there anylink for vPC configuration betwwn 2 FIs and 2 N5Ks , with FCoE traffic over this vPC Link , i dont kow if this is doable thanks

I'm trying to add an external SAS shelf to a Cisco UCS C240 server.   The server does not have any onboard SAS ports.   What's the best solution to add this SAS shelf?