I zoned in my wwpn on the fiber switches but the array is not seeing the wwpn. Is there anything that needs to be enabled on the bios of the blade server?Boot orer is cdrom and then san boot
I zoned in my wwpn on the fiber switches but the array is not seeing the wwpn. Is there anything that needs to be enabled on the bios of the blade server?Boot orer is cdrom and then san boot
I have a C200 M1 running 1.4(3p), I am noticing some performance issues with this server, it just seems slow. I went to it physically and you can hear the PSU fans spin up and slow down every few seconds. Within an SSH to the CIMC I am seeing both ...
Hey,Is this still supported in UCS 2.0 with the new 6100 with "unified ports"?
for each blade, we have 2 vnics assigned to the server. one vnic to fexA and one vnic to fexB. then i create only 1 vswitch and assign both vnics to this vswitch.then all port groups are under this one vswitch.question is it better to create more vni...
Hi,I do not undersand the assigment order for IP pool, Mac @ Pool, WWN pool....Sometime it seems logical :for example : MAC pool 00:25:B5:41:0A:00 to 00:25:B5:41:0A:3F, the server 1_nic1 get 00:25:B5:41:0A:3F, the server 1_nic2 get 00:25:B5:41:0A:2F....
Hello,I do not understand the advantage(s) to use a host firmware policies.It seems to me that it is more flexible to upgrades endpoints for each server with apply a maintenance policy "Uer Ack" in order to get "Pending Activies" for servers which ne...
I see this under license management, general. and grace perios 120days. what does this mean? Also I do not see anything intalled under licenses. Does this mean I cannot use vm fex or 1000v?
Hi,I have two UCS C220 M3 server in my environment, one is working swimmingly while the other are struggling with problems.When we boot the problem's UCS, through console we can access the UCS BIOS & CIMC config utility. We're able to enter the IP ad...
Hello,is it possible to change the columns in the kvm launch manager. Right now our users just see the service profiles and other stuff there, and they have no idea, which server is "behind" the service profile. we use the "User Label" to point to th...
Hi,I need a datasheet or technical documents for N5K-C5548UPM-B-S48.Manthan
Hi all.I want to configure UCS Manager to send an email to me in case of having error (critical/major/minor)I read configuration guide, and it says that I must have a CCO ID to register smart call home.I don't want to register SCH, I just want UCSM t...
Hi everyone. I have a UCS C240 M3 for a demo with the following hardware. UCS C240 M3 SFF2 1xE5-2609 1x8GB ROM55 2x650W SD RAILSSMARTNET 8X5XNBD UCS C240 M3 S2 Server-SFF2.4 GHz E5-2609/80W 4C/10MB Cache/DDR3 1066MHz8GB DDR3-1600-MHz RDIMM/PC3-1...
Hi,I am looking for a solution where I have to use / connect 2 pairs of Cisco UCS Fabric Interconnect 6248UP.Can anyone help me with solution for this. Like what I will require do this, any switch, router configuration change or something?If anyone h...
Hi, I try upgrading my Nexus 5548 with the release 5.1(3)N2(1b)But I see that the image is'y not compatibible with the module 1 !!!I followed the Upgrade and Downgrade Guide.Help me.********************************************** CLI output ********...
Hello All, Looking for some guidance in order to develop a green field project, and appreciate any inputs. Client wants to virtualize most of his corporate applications, mainly microsoft deployment such as AD, Exchange, Webserver, DNS, NTP, FTP, etc....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-18-2024 02:09 PM | ||
07-18-2024 08:17 AM | ||
06-20-2024 06:10 AM | ||
06-14-2024 01:49 PM | ||
06-13-2024 07:31 AM |