Hello, We are running Cisco UCS which si connected with FI to cisco 4510R switch and problem is we are not receiving RSPAN and ERSPAN packets on UCS server machine. we advise any workaround for this. We are trying to resolve this issue via using PPTP...
Forum Posts
Hi,I'm trying to create a raid1 config on an UCS managed C240M5 server with 240GB SATA M.2 disks.I have done the same as described in this thread:https://community.cisco.com/t5/unified-computing-system-blogs/how-to-boot-esxi-on-ucs-m2-hwraid-boot-opt...
Hi,We are trying to configure Zabbix for Alerting and monitoring of Cisco UCS.can you guide me on how to do this.?UCS Central 2.0(1i)Zabbix version 3.4. Thank you.
I have a UCS-EN140N-M2 in an ISR4451 router (running Cisco IOS XE Software, Version 16.08.01) with this configuration:router#show platform Chassis type: ISR4451-X/K9 Slot Type State Insert time (ago) --------- ---...
Why do UCS system event logs show 1970 dates? This SEL was cleared a couple days ago. I see this A LOT in UCS. What's the deal? Number of SELs:81 | 01/12/1970 23:46:43 UTC | CIMC | Event Logging Disabled SEL_FULLNESS #0x9b | Log Area Reset/Cleared ...
Hi,I was curious to know more about the service Bug Scrub. Is this applicable to any Cisco appliance/ software? Hope you can help me.Thank you in advance.
Hi, trying to deploy HX and getting the following error: Configuring static ip on the specified ESXi servers Server sys/rack-unit-2 config failed Reason: Unexpected prompt got through SoL for esxi Server sys/rack-unit-3 config ...
What is the best practice for bios policy on UCS C240M5 and UCS Manager 4.1 with VMware VSAN 7. I try to find whitepaper found this https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper-c11-735680....
Hello,So we are having a connectivity issue inside our virtual VMware environmentFirst a few things about our environment:Fabric Interconnects configured as EHMWe have multiple VLANs configured on our Fabric InterconnectsThe ESXi blades have at least...
Hi, We recently added more disks to a stand alone c240 (2.0(6d)) and these new drives are showing with a Foreign Config fault. There are 2 existing Virtual disk I dont want to destroy or modify. The goal is to create a new VD with the newly added dis...
After I shutdown my vcenter environment - what steps or command do i need to shutdown the UCSM environment before I lose power. Is there a clean way to shutdown ucsm?
Hi, We have some new Cisco UCS-E-160S-M3/K9 servers running in Cisco ISR 4000 routers.I got access to the servers and am trying to install RHEL 7.4 on them.In the console (tried both html and java) I map a local iso file and start the installation.Th...
I am currently running 6296UP, 6324 Minis, and 6454 Fabric Interconnects all with the latest firmware bundles for their respective models (4.1(1d)). Our security team has informed us that the 6296UPs and the 6324 Minis are showing as vulnerable for t...
Hi I am trying to get tech support file for a specific server in Cisco UCS Manager . Its been 3 hours since it is showing the status in progress and in the events section i found this timeout error [FSM:STAGE:REMOTE-ERROR]: EXTEND-TIMEOUT:Result: ex...
