Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

  Ask Me Anything Event   Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from  Monday,  August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...

sanandy - Parithosh Vema.jpg Pi7_Passport_Photo - Parithosh Vema.jpeg

Hello all,we have Cisco Prime NCS Ver. 1.0.2.29 running on a virtual appliance. Since a few weeks the alarm summary shows alarms but the alarm browser window is empty.Any ideas?Regards,Hubert

                  We are starting to experience some dropped connections while utilizing a 5508 WLC (SW: 7.4.100.0) with 2602e LAP's.  The connections seem to drop for 1-2 seconds and then reconnect on their own.  Machines and cards are varied.  Any ...

                   Hi ,We have upgraded our wireless infrastructure from 44xx wlc to 5508 . We have 2 foriegn controllers with HA and 2 anchor controllers , the wireless users were not facing any issues with the 44xx controllers but when we upgraded ...

Hello to all!!I`d like to know if roaming it's possible between radios. I mean: I've some ap with radio a and b/g/n and other only with b/g/n, client roaming between them is possible??thanks in advance!!                

                   Hi All,I tried to install my permanent license of my vWLC running 7.5 version and I change the priority of the eval license from high to low in order to make the pernament (base-ap-count) license to status "In-Used". However, after...

teru-lei by Level 1
  • 975 Views
  • 2 replies
  • 0 Helpful votes

Please help clarify this wording of Cisco's doc. I read through but still NOT clear what's that mean.Wording of A high-gain antenna on an access point will receive a signal from a 5-mW client from a greater distance than a low-gain antenna. It is the...

Currently I have two 5508 controllers each licensed for 100 AP's configured in a 1+N setup with a total of 100 AP's between the two controllers.  (50 each).I am going to add AP's in two remote buildings that are each connected to the core (where the ...

I have just deployed a WLC 5508 version 7.4  with 3602 APs at a Hospital.   The hospital is in process of migrating from a Nortel PBX and Cisco Callmanager.   Currently, they have about 100 spectralink wireless phones, and about 20 Cisco 7925 wireles...

Has anyone encountered this?All devices connect successfully (get ip/dhcp etc) but ONLY Android devices cannot browse the web.It did work for well over a year then suddenly stopped.Ip requests are fine looks almost like failed DNS resolution issue.Se...

jonathang by Level 1
  • 582 Views
  • 1 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card